MC912DG128AMPVE Freescale Semiconductor, MC912DG128AMPVE Datasheet - Page 268

• Manufacturer Part Number: MC912DG128AMPVE
• Description: IC MCU 128K FLASH 8MHZ 112-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HC12r

Specifications of MC912DG128AMPVE

• Core Processor: CPU12
• Core Size: 16-Bit
• Speed: 8MHz
• Connectivity: CAN, I²C, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 69
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 2K x 8
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x8/10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 112-LQFP
• Processor Series: HC912D
• Core: HC12
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: CAN/I2C/SCI/SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 69
• Number Of Timers: 8
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 2 (8-ch x 10-bit)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

ICSYS — Input Control System Control Register
Enhanced Capture Timer
Technical Data
268
RESET:
SH37
BIT 7
0
SH26
6
0
An IC register is empty when it has been read or latched into the holding
register.
A holding register is empty when it has been read.
NOVWx — No Input Capture Overwrite
Read: any time
Write: May be written once (SMODN=1). Writes are always permitted
when SMODN=0.
SHxy — Share Input action of Input Capture Channels x and y
TFMOD — Timer Flag-setting Mode
Use of the TFMOD bit in the ICSYS register ($AB) in conjunction with
the use of the ICOVW register ($AA) allows a timer interrupt to be
generated after capturing two values in the capture and holding
registers instead of generating an interrupt for every capture.
By setting TFMOD in queue mode, when NOVW bit is set and the
corresponding capture and holding registers are emptied, an input
capture event will first update the related input capture register with
Freescale Semiconductor, Inc.
For More Information On This Product,
0 = The contents of the related capture register or holding register
1 = The related capture register or holding register cannot be
0 = Normal operation
1 = The channel input ‘x’ causes the same action on the channel
SH15
5
0
can be overwritten when a new input capture or latch occurs.
written by an event unless they are empty (see
This will prevent the captured value to be overwritten until it is
read or latched in the holding register.
‘y’. The port pin ‘x’ and the corresponding edge detector is
used to be active on the channel ‘y’.
Go to: www.freescale.com
Enhanced Capture Timer
SH04
4
0
TFMOD
3
0
PACMX
2
0
MC68HC912DT128A — Rev 4.0
BUFEN
1
0
LATQ
BIT 0
0
IC
Channels).
MOTOROLA
$00AB