MC912DG128AMPVE Freescale Semiconductor, MC912DG128AMPVE Datasheet - Page 342

• Manufacturer Part Number: MC912DG128AMPVE
• Description: IC MCU 128K FLASH 8MHZ 112-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HC12r

Specifications of MC912DG128AMPVE

• Core Processor: CPU12
• Core Size: 16-Bit
• Speed: 8MHz
• Connectivity: CAN, I²C, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 69
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 2K x 8
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x8/10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 112-LQFP
• Processor Series: HC912D
• Core: HC12
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: CAN/I2C/SCI/SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 69
• Number Of Timers: 8
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 2 (8-ch x 10-bit)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

MSCAN Controller
18.8.4 Programmable Wake-Up Function
18.9 Timer Link
Technical Data
342
The msCAN12 can be programmed to apply a low-pass filter function to
the RxCAN input line while in SLEEP mode (see control bit WUPM in the
module control register,
This feature can be used to protect the msCAN12 from wake-up due to
short glitches on the CAN bus lines. Such glitches can result from
electromagnetic inference within noisy environments.
The msCAN12 will generate a timer signal whenever a valid frame has
been received. Because the CAN specification defines a frame to be
valid if no errors occurred before the EOF field has been transmitted
successfully, the timer signal will be generated right after the EOF. A
pulse of one bit time is generated. As the msCAN12 receiver engine
receives also the frames being sent by itself, a timer signal will also be
generated after a successful transmission.
The previously described timer signal can be routed into the on-chip
timer module (ECT). Under the control of the timer link enable (TLNKEN)
bit in the CMCR0, this signal will be connected to the ECT timer channel
m input
After ECT timer has been programmed to capture rising edge events, it
can be used under software control to generate 16-bit time stamps which
can be stored with the received message.
1. The timer channel being used for the timer link for CAN0 is channel 4 and for CAN1 is channel
5.
Freescale Semiconductor, Inc.
For More Information On This Product,
(1)
.
Go to: www.freescale.com
MSCAN Controller
msCAN12 Module Control Register
MC68HC912DT128A — Rev 4.0
(CMCR0)).
MOTOROLA