MPC562MZP56 Freescale Semiconductor, MPC562MZP56 Datasheet - Page 1046

• Manufacturer Part Number: MPC562MZP56
• Description: IC MPU 32BIT 56MHZ PPC 388-PBGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC562MZP56

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 56MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 64
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 388-BGA
• Processor Series: MPC5xx
• Core: PowerPC
• Data Bus Width: 32 bit
• Data Ram Size: 8 KB
• Interface Type: SCI, SPI, UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 56
• Number Of Timers: 22
• Operating Supply Voltage: 2.6 V to 5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 2 (10 bit, 32 Channel)
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Request inventory verification / Request inventory verification
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: No

READI Module
The DSDI data field has a 3-bit status header followed by 7 or 32 bits of data/instruction, depending on
the RCPU development port mode.
The DSDI message has the following format:
24.14.1.2 DSDO Message
The DSDO message is used by the device to upload information from the RCPU.
The DSDO data field has a 3-bit status header followed by 7 or 32 bits of data/instruction, depending on
the RCPU development port mode.
The three status bits in the DSDO data indicates if the device is ready to receive the next message from the
tool.
The DSDO message has the following format:
24.14.1.3 BDM Status Message
BDM status message is generated by the device to let the tool know about the status of debug mode.
BDM status message (with BDM status field equal to 0b1) is sent when the RCPU is in debug mode and
the device is ready to receive debug mode messages.
24-78
When sending in a DSDI data message, the DSDI data should contain the
control and status bits (start, mode, control), followed by the 7 or 32-bit
CPU instruction/data or trap enable, MSB first. See
data message transmission sequence.
The DSDO data received will contain the control and status bits and data
from the CPU, MSB first. See
transmission sequence.
TCODE (56)
TCODE (57)
[6 bits]
[6 bits]
MPC561/MPC563 Reference Manual, Rev. 1.2
Figure 24-80. DSDO Message Format
Figure 24-79. DSDI Message Format
Max Length = 41 bits
Min Length = 16 bits
Max Length = 41 bits
Min Length = 16 bits
Figure 24-85
NOTE
NOTE
[10 or 35 bits]
[10 or 35 bits]
DSDI data
DSDO data
for DSDO data message
Figure 24-85
for DSDI
Freescale Semiconductor