tb62725bpg Marktech Optoelectronics, tb62725bpg Datasheet - Page 17

• Manufacturer Part Number: tb62725bpg
• Description: 8?bit?constant ?current?led?driver?of?the?3.3?v?and?5?v?power?supply?voltage?operation
• Manufacturer: Marktech Optoelectronics

RESTRICTIONS ON PRODUCT USE
About solderability, following conditions were confirmed
Solderability
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer,
The products described in this document are subject to the foreign exchange and foreign trade laws.
The information contained herein is presented only as a guide for the applications of our products. No responsibility
The information contained herein is subject to change without notice.
Use of Sn­63Pb solder Bath
Use of Sn­3.0Ag­0.5Cu solder Bath
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).
These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily
high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury
(“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship
instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical
instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document
shall be made at the customer’s own risk.
is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third
parties which may result from its use. No license is granted by implication or otherwise under any intellectual
property or other rights of TOSHIBA CORPORATION or others.
∙ solder bath temperature = 230°C
∙ dipping time = 5 seconds
∙ the number of times = once
∙ use of R­type flux
∙ solder bath temperature = 245°C
∙ dipping time = 5 seconds
∙ the number of times = once
∙ use of R­type flux
17
TB62725BPG/BFG/BFNG
2005­04­20
000707EBA