PIC18F27J53-I/SP Microchip Technology, PIC18F27J53-I/SP Datasheet

no-image

PIC18F27J53-I/SP

Manufacturer Part Number
PIC18F27J53-I/SP
Description
IC PIC MCU 128KB FLASH 28SPDIP
Manufacturer
Microchip Technology
Series
PIC® XLP™ 18Fr

Specifications of PIC18F27J53-I/SP

Program Memory Type
FLASH
Program Memory Size
128KB (64K x 16)
Package / Case
*
Core Processor
PIC
Core Size
8-Bit
Speed
48MHz
Connectivity
I²C, LIN, SPI, UART/USART, USB
Peripherals
Brown-out Detect/Reset, POR, PWM, WDT
Number Of I /o
22
Ram Size
3.8K x 8
Voltage - Supply (vcc/vdd)
2.15 V ~ 3.6 V
Data Converters
A/D 10x10b/12b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Processor Series
PIC18F
Core
PIC
Data Bus Width
8 bit
Data Ram Size
3.8 KB
Interface Type
I2C, SPI, USART
Maximum Clock Frequency
48 MHz
Number Of Programmable I/os
16
Number Of Timers
8
Operating Supply Voltage
2.15 V to 3.6 V
Maximum Operating Temperature
+ 85 C
Mounting Style
Through Hole
Minimum Operating Temperature
- 40 C
Controller Family/series
PIC18
Cpu Speed
48MHz
Embedded Interface Type
I2C, SPI, USART
Digital Ic Case Style
DIP
Supply Voltage Range
1.8V To 5.5V
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
PIC18F27J53-I/SP
Manufacturer:
MITSUBISHI
Quantity:
12
The PIC18F47J53 Family devices that you have
received conform functionally to the current Device
Data Sheet (DS39964B), except for the anomalies
described in this document.
The silicon issues discussed in the following pages are
for silicon revisions with the Device and Revision IDs
listed in
Table
The errata described in this document will be
addressed in future revisions of the PIC18F47J53
Family silicon.
Data Sheet clarifications and corrections start on page 6,
following the discussion of silicon issues.
The silicon revision level can be identified using the
current version of MPLAB
grammers, debuggers, and emulation tools, which are
available at the Microchip corporate web site
(www.microchip.com).
TABLE 1:
 2010 Microchip Technology Inc.
Note 1:
Note:
2.
2:
Table
The Device IDs (DEVID and DEVREV) are located at the last two implemented addresses of configuration
memory space. They are shown in hexadecimal in the format “DEVID DEVREV”.
Refer to the “PIC18F2XJXX/4XJXX Family Flash Microcontroller Programming Specification” (DS39687)
for detailed information on Device and Revision IDs for your specific device.
This document summarizes all silicon
errata issues from all revisions of silicon,
previous as well as current. Only the
issues indicated in the last column of
Table 2
revision (A1).
PIC18LF47J53
PIC18LF46J53
PIC18LF27J53
PIC18LF26J53
PIC18F47J53
PIC18F46J53
PIC18F27J53
PIC18F26J53
Part Number
1. The silicon issues are summarized in
SILICON DEVREV VALUES
Silicon Errata and Data Sheet Clarification
apply to the current silicon
®
IDE and Microchip’s pro-
PIC18F47J53 Family
PIC18F47J53 FAMILY
Device ID
2C7h
2C5h
2C3h
2C1h
2D7h
2D5h
2D3h
2D1h
(1)
For example, to identify the silicon revision level using
MPLAB IDE in conjunction with MPLAB ICD 2 or
PICkit™ 3:
1.
2.
3.
4.
The DEVREV values for the various PIC18F47J53
Family silicon revisions are shown in
Note:
Using the appropriate interface, connect the
device to the MPLAB ICD 2 programmer/
debugger or PICkit™ 3.
From the main menu in MPLAB IDE, select
Configure>Select Device, and then select the
target part number in the dialog box.
Select
(Debugger>Select Tool).
Perform a “Connect” operation to the device
(Debugger>Connect). Depending on the devel-
opment tool used, the part number and Device
Revision ID value appear in the Output window.
If you are unable to extract the silicon
revision level, please contact your local
Microchip sales office for assistance.
the
Revision ID for Silicon Revision
MPLAB
01h
A1
hardware
Table
DS80506C-page 1
1.
tool
(2)

Related parts for PIC18F27J53-I/SP

PIC18F27J53-I/SP Summary of contents

Page 1

... Microchip corporate web site (www.microchip.com). TABLE 1: SILICON DEVREV VALUES Part Number PIC18F47J53 PIC18F46J53 PIC18F27J53 PIC18F26J53 PIC18LF47J53 PIC18LF46J53 PIC18LF27J53 PIC18LF26J53 The Device IDs (DEVID and DEVREV) are located at the last two implemented addresses of configuration Note 1: memory space. They are shown in hexadecimal in the format “ ...

Page 2

... If a Stop condition occurs in the middle of an address or data reception, there will be issues with the SCL clock stream and RCEN bit slave reception, the module may have problems receiving correct data. If interrupts are enabled, disabling and re-enabling the module requires Affected (1) Revisions delay.  2010 Microchip Technology Inc. ...

Page 3

... Before attempting to set the PLLEN bit, config- ure OSCCON<6:4> to ‘0b110’ or ‘0b111’ to select the 4 MHz or 8 MHz INTOSC postscaler. Affected Silicon Revisions A1 X  2010 Microchip Technology Inc. PIC18F47J53 FAMILY 3. Module: Analog-to-Digital Converter (ADC) At the beginning of sample acquisition, one or more small pull-up pulses (approximately 25 ns long) may output to the currently selected ANx analog channel ...

Page 4

... Prior to the I C slave reception, enable the clock stretching feature. This is done by setting the SEN bit (SSPxCON2<0>). • Each time the SSPxIF is set, read the SSPxBUF before the first rising clock edge of the next byte being received  2010 Microchip Technology Inc. ...

Page 5

... RCSTAx register (if needed), but do not set SPEN = 1 yet ;Now enable the module, but add a 2-Tcy delay before executing any two-cycle ;instructions bsf RCSTA1, SPEN nop nop  2010 Microchip Technology Inc. PIC18F47J53 FAMILY Work around Add enables the EUSART module (sets SPEN, CREN or TXEN = 1). See ...

Page 6

... DD DDCORE pin. DDCORE FREQUENCY vs. ESR PERFORMANCE FOR SUGGESTED V CAP 0 100 1000 10,000 Frequency (MHz) 16V -55 to 125ºC 16V -55 to 85ºC 16V -55 to 125ºC 16V -55 to 85ºC 16V -55 to 125ºC 16V -55 to 85ºC  2010 Microchip Technology Inc. ...

Page 7

... This effect can be very signifi- cant, but is often overlooked or is not always documented. A typical DC bias voltage vs. capacitance graph for 16V, 10V and 6.3V rated capacitors is shown in Figure 2-4.  2010 Microchip Technology Inc. PIC18F47J53 FAMILY FIGURE 2-4 DC BIAS VOLTAGE vs. CAPACITANCE CHARACTERISTICS 10 ...

Page 8

... PIN DD Pin at high-impedance +85ºC  V  5.5V, ±25º PIN Pin at high-impedance +85ºC  V  V ±25º PIN DD +85ºC  V  V ±25º PIN USB +85ºC  V  V ±25º PIN DD +85ºC  2010 Microchip Technology Inc. ...

Page 9

... Voltage Output High OH The D+ and D- signal lines have built-in impedance matching resistors. No external resistors, capacitors or Note 1: magnetic components are necessary on the D+/D- signal paths between the PIC18F47J53 family device and a USB cable.  2010 Microchip Technology Inc. PIC18F47J53 FAMILY Min Typ Max Units 3.0 — ...

Page 10

... Slave Reception) and 7 (EUSART – Enable/Disable). No data sheet clarifications. Rev B Document 10/2010) Added data sheet clarification issues 1 (Guidelines For Getting Started with PIC18FJ Microcontrollers), 2 (Reset) and 3 (Device Overview). Rev C Document 12/2010) Added data sheet clarification issues 4-5 (Electrical Characteristics). DS80506C-page  2010 Microchip Technology Inc. ...

Page 11

... PICtail, REAL ICE, rfLAB, Select Mode, Total Endurance, TSHARC, UniWinDriver, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. ...

Page 12

... Philippines - Manila Tel: 63-2-634-9065 Fax: 63-2-634-9069 Singapore Tel: 65-6334-8870 Fax: 65-6334-8850 Taiwan - Hsin Chu Tel: 886-3-6578-300 Fax: 886-3-6578-370 Taiwan - Kaohsiung Tel: 886-7-213-7830 Fax: 886-7-330-9305 Taiwan - Taipei Tel: 886-2-2500-6610 Fax: 886-2-2508-0102 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350  2010 Microchip Technology Inc. 08/04/10 ...

Related keywords