PIC16F873A-I/SS Microchip Technology, PIC16F873A-I/SS Datasheet - Page 208

• Manufacturer Part Number: PIC16F873A-I/SS
• Description: IC MCU FLASH 4KX14 EE 28SSOP
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F873A-I/SS

• Core Size: 8-Bit
• Program Memory Size: 7KB (4K x 14)
• Core Processor: PIC
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Type: FLASH
• Eeprom Size: 128 x 8
• Ram Size: 192 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 5x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SSOP
• Controller Family/series: PIC16F
• No. Of I/o's: 22
• Eeprom Memory Size: 128Byte
• Ram Memory Size: 192Byte
• Cpu Speed: 20MHz
• No. Of Timers: 3
• Core: PIC
• Processor Series: PIC16F
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 20 MHz
• Data Ram Size: 192 B
• Data Rom Size: 128 B
• On-chip Adc: Yes
• Number Of Programmable I/os: 22
• Number Of Timers: 3
• Operating Supply Voltage: 2 V to 5.5 V
• Mounting Style: SMD/SMT
• A/d Bit Size: 10 bit
• A/d Channels Available: 5
• Height: 1.75 mm
• Interface Type: I2C, SPI, USART
• Length: 10.2 mm
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 4 V
• Width: 5.3 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164307 - MODULE SKT FOR PM3 28SSOPAC164020 - MODULE SKT PROMATEII 44TQFPXLT28SS-1 - SOCKET TRANSITION ICE 28SSOP
• Lead Free Status / Rohs Status: Details
• Other names: PIC16F873AI/SS

PICmicro MID-RANGE MCU FAMILY
14.4
DS31014A-page 14-6
Compare Mode
In Compare mode, the 16-bit CCPRx register value is constantly compared against the TMR1
register pair value. When a match occurs, the CCPx pin is:
• Driven High
• Driven Low
• Remains Unchanged
The action on the pin is based on the value of control bits CCPxM3:CCPxM0 (CCPxCON<3:0>).
At the same time, a compare interrupt is also generated.
Figure 14-2: Compare Mode Operation Block Diagram
Note:
Timer1 must be running in Timer mode or Synchronized Counter mode if the CCP
module is using the compare feature. In Asynchronous Counter mode, the compare
operation may not work.
CCPx Pin
Output Enable
TRIS
Q
R
S
CCPxCON<3:0>
Mode Select
Special Event
Output
Logic
Set flag bit CCPxIF
match
CCPRxH CCPRxL
TMR1H
Comparator
1997 Microchip Technology Inc.
TMR1L