MC9S12E128CPVE Freescale Semiconductor, MC9S12E128CPVE Datasheet - Page 72

• Manufacturer Part Number: MC9S12E128CPVE
• Description: IC MCU 128K FLASH 25MHZ 112-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of MC9S12E128CPVE

• Core Processor: HCS12
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: EBI/EMI, I²C, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 91
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.35 V ~ 2.75 V
• Data Converters: A/D 16x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 112-LQFP
• Processor Series: S12E
• Core: HCS12
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: SCI/SPI
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 92
• Number Of Timers: 12
• Operating Supply Voltage: 3.135 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 16-ch x 10-bit
• On-chip Dac: 2-ch x 8-bit
• Controller Family/series: HCS12/S12X
• No. Of I/o's: 90
• Ram Memory Size: 8KB
• Cpu Speed: 25MHz
• No. Of Timers: 4
• Embedded Interface Type: I2C, SCI, SPI
• Rohs Compliant: Yes
• For Use With: M68EVB912E128 - BOARD EVAL FOR MC9S12E128/64
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Chapter 1 MC9S12E128 Device Overview (MC9S12E128DGV1)
impedance input pins. Consult the Port Integration Module (PIM) PIM_9E128 block description chapter,
TIM_16B4C block description chapter, and the PWM_8B6C block description chapter for information
about pin configurations.
1.4.43
External power and ground for I/O drivers. Bypass requirements depend on how heavily the MCU pins are
loaded.
1.4.44
External power and ground for I/O drivers and input to the internal voltage regulator. Bypass requirements
depend on how heavily the MCU pins are loaded.
1.4.45
Power is supplied to the MCU through VDD and VSS. This 2.5V supply is derived from the internal
voltage regulator. There is no static load on those pins allowed. The internal voltage regulator is turned off,
if VDDR is tied to ground.
1.4.46
VDDA, VSSA are the power supply and ground input pins for the voltage regulator and the analog to
digital converter.
1.4.47
VRH and VRL are the reference voltage input pins for the analog to digital converter.
1.4.48
Provides operating voltage and ground for the Oscillator and the Phased-Locked Loop. This allows the
supply voltage to the Oscillator and PLL to be bypassed independently. This 2.5V voltage is generated by
the internal voltage regulator.
72
VDDX,VSSX — Power & Ground Pins for I/O Drivers
VDDR, VSSR — Power Supply Pins for I/O Drivers & for Internal
Voltage Regulator
VDD1, VDD2, VSS1, VSS2 — Power Supply Pins for Internal Logic
VDDA, VSSA — Power Supply Pins for ATD and VREG
VRH, VRL — ATD Reference Voltage Input Pins
VDDPLL, VSSPLL — Power Supply Pins for PLL
MC9S12E128 Data Sheet, Rev. 1.07
Freescale Semiconductor