MC9S12XDT256CAA Freescale Semiconductor, MC9S12XDT256CAA Datasheet - Page 361

• Manufacturer Part Number: MC9S12XDT256CAA
• Description: IC MCU 256K FLASH 80-QFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of MC9S12XDT256CAA

• Core Processor: HCS12X
• Core Size: 16-Bit
• Speed: 80MHz
• Connectivity: CAN, EBI/EMI, I²C, IrDA, LIN, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 59
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 2.35 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-QFP
• Processor Series: S12XD
• Core: HCS12
• Data Bus Width: 16 bit
• Data Ram Size: 16 KB
• Interface Type: CAN/I2C/SCI/SPI
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 59
• Number Of Timers: 12
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Development Tools By Supplier: EVB9S12XDP512E
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

7.4.3
This section describes interrupts originated by the ECT block. The MCU must service the interrupt
requests.
The ECT only originates interrupt requests. The following is a description of how the module makes a
request and how the MCU should acknowledge that request. The interrupt vector offset and interrupt
number are chip dependent.
7.4.3.1
This active high output will be asserted by the module to request a timer channel 7–0 interrupt to be
serviced by the system controller.
7.4.3.2
This active high output will be asserted by the module to request a modulus counter underflow interrupt
to be serviced by the system controller.
7.4.3.3
This active high output will be asserted by the module to request a timer pulse accumulator B overflow
interrupt to be serviced by the system controller.
7.4.3.4
This active high output will be asserted by the module to request a timer pulse accumulator A input
interrupt to be serviced by the system controller.
7.4.3.5
This active high output will be asserted by the module to request a timer pulse accumulator A overflow
interrupt to be serviced by the system controller.
7.4.3.6
This active high output will be asserted by the module to request a timer overflow interrupt to be serviced
by the system controller.
Freescale Semiconductor
Table 7-37
Timer channel 7–0
Modulus counter underflow
Pulse accumulator B overflow
Pulse accumulator A input
Pulse accumulator A overflow
Timer overflow
Interrupts
Channel [7:0] Interrupt
Modulus Counter Interrupt
Pulse Accumulator B Overflow Interrupt
Pulse Accumulator A Input Interrupt
Pulse Accumulator A Overflow Interrupt
Timer Overflow Interrupt
Interrupt Source
lists the interrupts generated by the ECT to communicate with the MCU.
MC9S12XDP512 Data Sheet, Rev. 2.21
Table 7-37. ECT Interrupts
Active high timer channel interrupts 7–0
Active high modulus counter interrupt
Active high pulse accumulator B interrupt
Active high pulse accumulator A input interrupt
Pulse accumulator overflow interrupt
Timer 0verflow interrupt
Chapter 7 Enhanced Capture Timer (S12ECT16B8CV2)
Description
361