MC9S12XEP100CAL Freescale Semiconductor, MC9S12XEP100CAL Datasheet - Page 817

• Manufacturer Part Number: MC9S12XEP100CAL
• Description: IC MCU 16BIT 1M FLASH 112-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of MC9S12XEP100CAL

• Core Processor: HCS12X
• Core Size: 16-Bit
• Speed: 50MHz
• Connectivity: CAN, EBI/EMI, I²C, IrDA, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 91
• Program Memory Size: 1MB (1M x 8)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 1.72 V ~ 5.5 V
• Data Converters: A/D 16x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 112-LQFP
• Processor Series: S12XE
• Core: HCS12
• Data Bus Width: 16 bit
• Data Ram Size: 64 KB
• Interface Type: CAN/SCI/SPI
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 91
• Number Of Timers: 25
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Development Tools By Supplier: KIT33812ECUEVME, EVB9S12XEP100, DEMO9S12XEP100
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 16-ch x 12-bit
• Package: 112LQFP
• Family Name: HCS12X
• Maximum Speed: 50 MHz
• Operating Supply Voltage: 1.8|2.8|5 V
• For Use With: EVB9S12XEP100 - BOARD EVAL FOR MC9S12XEP100DEMO9S12XEP100 - BOARD DEMO FOR MC9S12XEP100
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Chapter 23
Voltage Regulator (S12VREGL3V3V1)
23.1
Module VREG_3V3 is a tri output voltage regulator that provides two separate 1.84V (typical) supplies
differing in the amount of current that can be sourced and a 2.82V (typical) supply. The regulator input
voltage range is from 3.3V up to 5V (typical).
23.1.1
Module VREG_3V3 includes these distinctive features:
23.1.2
There are three modes VREG_3V3 can operate in:
Freescale Semiconductor
Revision
Because of an order from the United States International Trade Commission, BGA-packaged product lines and partnumbers
Number
V01.02
V01.03
V01.04
indicated here currently are not available from Freescale for import or sale in the United States prior to September 2010
•
•
•
•
•
•
1. Full performance mode (FPM) (MCU is not in stop mode)
2. Reduced power mode (RPM) (MCU is in stop mode)
Three parallel, linear voltage regulators with bandgap reference
Low-voltage detect (LVD) with low-voltage interrupt (LVI)
Power-on reset (POR)
Low-voltage reset (LVR)
High Temperature Detect (HTD) with High Temperature Interrupt (HTI)
Autonomous periodical interrupt (API)
The regulator is active, providing the nominal supply voltages with full current sourcing capability.
Features LVD (low-voltage detect), LVR (low-voltage reset), and POR (power-on reset) and HTD
(High Temperature Detect) are available. The API is available.
The purpose is to reduce power consumption of the device. The output voltage may degrade to a
lower value than in full performance mode, additionally the current sourcing capability is
substantially reduced. Only the POR is available in this mode, LVD, LVR and HTD are disabled.
The API is available.
Introduction
Revision Date
Features
Modes of Operation
09 Sep 2005
23 Sep 2005
08 Jun 2007
23.3.2.3/23-824
23.3.2.1/23-822
23.4.6/23-829
Sections
Affected
MC9S12XE-Family Reference Manual , Rev. 1.23
Table 23-1. Revision History
- Updates for API external access and LVR flags.
- VAE reset value is 1.
- Added temperature sensor to customer information
Description of Changes
817