MPC562MZP56 Freescale Semiconductor, MPC562MZP56 Datasheet - Page 309

• Manufacturer Part Number: MPC562MZP56
• Description: IC MPU 32BIT 56MHZ PPC 388-PBGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC562MZP56

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 56MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 64
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 388-BGA
• Processor Series: MPC5xx
• Core: PowerPC
• Data Bus Width: 32 bit
• Data Ram Size: 8 KB
• Interface Type: SCI, SPI, UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 56
• Number Of Timers: 22
• Operating Supply Voltage: 2.6 V to 5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 2 (10 bit, 32 Channel)
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Request inventory verification / Request inventory verification
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: No

Clocks and Power Control
The low-power divider block is controlled in the system clock control register (SCCR). The default state
of the low-power divider is to divide all clocks by one. Thus, for a 40-MHz system, the general system
clocks are each 40 MHz. Whenever power-on reset is asserted, the MF bits are set according to
Table
8-1,
and the division factor high frequency (DFNH) and division factor low frequency (DFNL) bits in SCCR
are set to the value of 0 (÷1 for DFNH and ÷2 for DFNL).
8.5
Internal Clock Signals
The internal clocks generated by the clocks module are shown in
Figure
8-4. The clocks module also
generates the CLKOUT and ENGCLK external clock signals. The PLL synchronizes these signals to each
other. The PITRTCLK frequency and source are specified by the RTDIV and RTSEL bits in the SCCR.
When the backup clock is functioning as the system clock, the backup clock is automatically selected as
the time base clock source and is twice the MPC561/MPC563 system clock.
MPC561/MPC563 Reference Manual, Rev. 1.2
Freescale Semiconductor
8-7