MPC562MZP56 Freescale Semiconductor, MPC562MZP56 Datasheet - Page 781

• Manufacturer Part Number: MPC562MZP56
• Description: IC MPU 32BIT 56MHZ PPC 388-PBGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC562MZP56

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 56MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 64
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 388-BGA
• Processor Series: MPC5xx
• Core: PowerPC
• Data Bus Width: 32 bit
• Data Ram Size: 8 KB
• Interface Type: SCI, SPI, UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 56
• Number Of Timers: 22
• Operating Supply Voltage: 2.6 V to 5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 2 (10 bit, 32 Channel)
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Request inventory verification / Request inventory verification
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: No

17.10.3.1 Clock Selection
The MPWMSM contains an 8-bit prescaler clocked by the output signal from the MIOS14 counter
prescaler submodule (f
of one of 256 divide ratios which give to the MPWMSM a large choice of frequencies available for the
down-counter. The MPWMSM down-counter is thus capable of counting with a clock frequency ranging
from f
Switching the MPWMSM from disable to enable will reload the value of MPWMSCR[CP] into the 8-bit
prescaler counter.
17.10.3.2 Counter
A 16-bit down-counter in the MPWMSM provides the time reference for the output signal. The counter is
software writable. When writing to the counter (i.e., at the MPWMCNTR address), it also writes to the
MPWMPERR register. When in transparent mode (TRSP = 1), writing to the MPWMPERR will also write
to the counter. The down-counter is readable at anytime. The value loaded in the down-counter
corresponds to the period of the output signal.
When the MPWMSM is enabled, the counter begins counting. As long as it is enabled, the counter counts
down freely. The counter counts at the rate established by the prescaler. When the count down reaches
0x0001, the load operation is executed and the value in the MPWMPERR register is loaded in the
MPWMCNTR register, (i.e., the counter). Then the counter restarts to count down from that value.
17.10.3.3 Period Register
The period section is composed of a 16-bit data register (MPWMPERR). The software establishes the
period of the output signal in register MPWMPERR.
When the MPWMSM is running in transparent mode, the period value in register MPWMPERR is
immediately transferred to the counter on a write to the MPWMPERR.
When the MPWMSM is running in double-buffered mode, the period value in register MPWMPERR can
be changed at any time without affecting the current period of the output signal. The new value of
MPWMPERR will be transferred to the counter only when the counter reaches the value of 0x0001 and
generates a load signal.
Period values of 0x0000, 0x0001, and 0x0002 are MPWMSM special cases:
Freescale Semiconductor
•
•
•
•
•
•
•
•
SYS
An output flip-flop with output buffer and polarity control
An input/output signal with data direction control
An 8-bit prescaler and clock selection logic
A 16-bit down-counter (MPWMCNTR)
A register to hold the next period values (MPWMPERR)
Two registers to hold the current and next pulse width values (MPWMPULR)
A less-than or equal comparator
A status and control register (MPWMSCR)
/2 to f
SYS
/4096.
SYS
/2 to f
SYS
MPC561/MPC563 Reference Manual, Rev. 1.2
/16). The MPWMSM clock selector allows the choice, by software,
Modular Input/Output Subsystem (MIOS14)
17-49