ATXMEGA256A3B-MH Atmel, ATXMEGA256A3B-MH Datasheet - Page 9
![MCU AVR 256KB FLASH A3B 64-QFN](/photos/12/13/121326/313-64-qfn_sml.jpg)
ATXMEGA256A3B-MH
Manufacturer Part Number
ATXMEGA256A3B-MH
Description
MCU AVR 256KB FLASH A3B 64-QFN
Manufacturer
Atmel
Series
AVR® XMEGAr
Specifications of ATXMEGA256A3B-MH
Core Processor
AVR
Core Size
8/16-Bit
Speed
32MHz
Connectivity
I²C, SPI, UART/USART
Peripherals
Brown-out Detect/Reset, DMA, POR, PWM, WDT
Number Of I /o
49
Program Memory Size
256KB (128K x 16)
Program Memory Type
FLASH
Eeprom Size
4K x 8
Ram Size
16K x 8
Voltage - Supply (vcc/vdd)
1.6 V ~ 3.6 V
Data Converters
A/D 16x12b; D/A 2x12b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
64-MLF®, 64-QFN
Processor Series
ATXMEGA256x
Core
AVR8
Data Bus Width
8 bit, 16 bit
Data Ram Size
16 KB
Interface Type
I2C, SPI, USART
Maximum Clock Frequency
32 MHz
Number Of Programmable I/os
49
Number Of Timers
7
Operating Supply Voltage
1.6 V to 3.6 V
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
3rd Party Development Tools
EWAVR, EWAVR-BL
Development Tools By Supplier
ATAVRDRAGON, ATAVRISP2, ATAVRONEKIT
Minimum Operating Temperature
- 40 C
On-chip Adc
12 bit, 8 Channel
On-chip Dac
12 bit, 2 Channel
For Use With
ATAVRONEKIT - KIT AVR/AVR32 DEBUGGER/PROGRMMRATSTK600 - DEV KIT FOR AVR/AVR32770-1007 - ISP 4PORT ATMEL AVR MCU SPI/JTAG770-1004 - ISP 4PORT FOR ATMEL AVR MCU SPI
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
ATXMEGA256A3B-MU
ATXMEGA256A3B-MU
ATXMEGA256A3B-MU
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
ATXMEGA256A3B-MH
Manufacturer:
ATMEL/爱特梅尔
Quantity:
20 000
- Current page: 9 of 445
- Download datasheet (6Mb)
3.7
3.8
3.9
8077H–AVR–12/09
Status Register
Stack and Stack Pointer
Register File
The Status Register (SREG) contains information about the result of the most recently executed
arithmetic or logic instruction. This information can be used for altering program flow in order to
perform conditional operations. Note that the Status Register is updated after all ALU opera-
tions, as specified in the instruction set reference. This will in many cases remove the need for
using the dedicated compare instructions, resulting in faster and more compact code.
The Status Register is not automatically stored when entering an interrupt routine nor restored
when returning from an interrupt. This must be handled by software.
The Status Register is accessible in the I/O Memory space.
The Stack is used for storing return addresses after interrupts and subroutine calls. It can also
be used for storing temporary data. The Stack Pointer (SP) register always points to the top of
the Stack. It is implemented as two 8-bit registers that is accessible in the I/O Memory space.
Data is pushed and popped from the Stack using the PUSH and POP instructions. The Stack is
implemented as growing from higher memory locations to lower memory locations. This implies
that a pushing data on the Stack decreases the SP, and popping data off the Stack increases
the SP.The SP is automatically loaded after reset, and the initial value is the highest address of
the internal SRAM. If the SP is changed, it must be set to point above address 0x2000 and it
must be defined before any subroutine calls are executed or before interrupts are enabled.
During interrupts or subroutine calls the return address is automatically pushed on the Stack.
The return address can be two or three bytes, depending of the memory size of the device. For
devices with 128K bytes or less of program memory the return address is two bytes, hence the
Stack Pointer is decremented/incremented by two. For devices with more than 128K bytes of
program memory, the return address is three bytes, hence the SP is decremented/incremented
by three. The return address is popped of the Stack when returning from interrupts using the
RETI instruction, and subroutine calls using the RET instruction.
The SP is decremented by one when data is pushed onto the Stack with the PUSH instruction,
and incremented by one when data is popped off the Stack using the POP instruction.
To prevent corruption when updating the Stack Pointer from software, a write to SPL will auto-
matically disable interrupts for up to 4 instructions or until the next I/O memory write.
The Register File consists of 32 x 8-bit general purpose registers. In order to achieve the
required performance and flexibility, the Register File supports the following input/output
schemes:
• One 8-bit output operand and one 8-bit result input
• Two 8-bit output operands and one 8-bit result input
• Two 8-bit output operands and one 16-bit result input
• One 16-bit output operand and one 16-bit result input
XMEGA A
9
Related parts for ATXMEGA256A3B-MH
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
![ATSTK600](/photos/9/20/92038/atstk600_tmb.jpg)
Part Number:
Description:
DEV KIT FOR AVR/AVR32
Manufacturer:
Atmel
Datasheet:
![U641B](/images/manufacturer_photos/0/0/79/atmel_corporation_tmb.jpg)
Part Number:
Description:
INTERVAL AND WIPE/WASH WIPER CONTROL IC WITH DELAY
Manufacturer:
ATMEL Corporation
Datasheet:
![U4082B](/images/manufacturer_photos/0/0/79/atmel_corporation_tmb.jpg)
Part Number:
Description:
Low-Voltage Voice-Switched IC for Hands-Free Operation
Manufacturer:
ATMEL Corporation
Datasheet:
![U4089B](/images/manufacturer_photos/0/0/79/atmel_corporation_tmb.jpg)
Part Number:
Description:
MONOLITHIC INTEGRATED FEATUREPHONE CIRCUIT
Manufacturer:
ATMEL Corporation
Datasheet:
![U4255BM-M](/images/manufacturer_photos/0/0/79/atmel_corporation_tmb.jpg)
Part Number:
Description:
AM-FM Receiver IC U4255BM-M
Manufacturer:
ATMEL Corporation
Datasheet:
![U4089B-P](/images/manufacturer_photos/0/0/79/atmel_corporation_tmb.jpg)
Part Number:
Description:
Monolithic Integrated Feature Phone Circuit
Manufacturer:
ATMEL Corporation
Datasheet:
![TDA4470](/images/manufacturer_photos/0/0/79/atmel_corporation_tmb.jpg)
Part Number:
Description:
Multistandard Video-IF and Quasi Parallel Sound Processing
Manufacturer:
ATMEL Corporation
Datasheet:
![ATF22V10B-25PC](/images/manufacturer_photos/0/0/79/atmel_corporation_tmb.jpg)
Part Number:
Description:
High-performance EE PLD
Manufacturer:
ATMEL Corporation
Datasheet:
![AT89C51ED2-IM](/images/manufacturer_photos/0/0/79/atmel_corporation_tmb.jpg)
Part Number:
Description:
8-bit Flash Microcontroller
Manufacturer:
ATMEL Corporation
Datasheet:
![AT24C01](/images/manufacturer_photos/0/0/79/atmel_corporation_tmb.jpg)
Part Number:
Description:
2-Wire Serial EEPROM
Manufacturer:
ATMEL Corporation
Datasheet: