MC912D60CCPVE Freescale Semiconductor, MC912D60CCPVE Datasheet - Page 110

• Manufacturer Part Number: MC912D60CCPVE
• Description: IC MCU 16BIT 112-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HC12r

Specifications of MC912D60CCPVE

• Core Processor: CPU12
• Core Size: 16-Bit
• Speed: 8MHz
• Connectivity: CAN, MI Bus, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 68
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x8/10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 112-LQFP
• Processor Series: HC912D
• Core: HC12
• Data Bus Width: 16 bit
• Data Ram Size: 2 KB
• Interface Type: CAN, SCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 86
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

EEMCR — EEPROM Module Configuration
EEPROM Memory
Technical Data
110
1. Bit 5 has a test function and should not be programmed.
2. The FPOPEN bit is available only on the 1L02H and later mask sets. For previous masks, this bit is reserved.
3. Loaded from SHADOW word.
RESET:
NOBDML
Bit 7
—
NOTE:
NOTE:
(3)
NOSHW
—
6
Bits[7:4] are loaded at reset from the EEPROM SHADOW word.
Bit 5 is reserved for test purposes. This location in SHADOW word
should not be programmed otherwise some locations of regular
EEPROM array will not be visible.
NOBDML — Background Debug Mode Lockout Disable
NOSHW — SHADOW Word Disable
Bit 6 from high byte of SHADOW word should not be cleared (set to '0')
in order to have the full EEPROM array visible. If Bit 6 from the high byte
of the SHADOW word is cleared then the following thirty bytes
$0FC2–$0FFF have no meaning and are reserved by Freescale.
Loaded from SHADOW word at reset.
Read anytime. Write anytime in special modes (SMODN=0).
Loaded from SHADOW word at reset.
Read anytime. Write anytime in special modes (SMODN=0).
When NOSHW is cleared, the regular EEPROM array bytes at
address $0FC0 and $0FC1 are not visible. The SHADOW word is
accessed instead for both read and program/erase operations.
Bits[7:4] from the high byte of the SHADOW word, $0FC0, are loaded
to EEMCR[7:4]. Bits[1:0] from the high byte of the SHADOW word,
$0FC0,are loaded to EEDIVH[1:0]. Bits[7:0] from the low byte of the
SHADOW word, $0FC1,are loaded to EEDIVL[7:0]. BULK
program/erase only applies if SHADOW word is enabled.
Reserved
0 = The BDM lockout is enabled.
1 = The BDM lockout is disabled.
0 = The SHADOW word is enabled and accessible at address
1 = Regular EEPROM array at address $0FC0-$0FC1.
—
5
$0FC0-$0FC1.
(1)
FPOPEN
EEPROM Memory
—
4
(2)
3
1
1
EESWAI
2
1
PROTLCK
MC68HC912D60A — Rev. 3.1
1
0
Freescale Semiconductor
DMY
Bit 0
0
$00F0