MC912D60CCPVE Freescale Semiconductor, MC912D60CCPVE Datasheet - Page 149

• Manufacturer Part Number: MC912D60CCPVE
• Description: IC MCU 16BIT 112-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HC12r

Specifications of MC912D60CCPVE

• Core Processor: CPU12
• Core Size: 16-Bit
• Speed: 8MHz
• Connectivity: CAN, MI Bus, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 68
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x8/10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 112-LQFP
• Processor Series: HC912D
• Core: HC12
• Data Bus Width: 16 bit
• Data Ram Size: 2 KB
• Interface Type: CAN, SCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 86
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

11.6.4 STOP exit without Limp Home mode, clock monitor disabled
MC68HC912D60A — Rev. 3.1
Freescale Semiconductor
EXTALi
Clock Monitor Fail
Limp-Home
13-stage counter
(Clocked by XCLK)
BCSP
STOP (DLY = 1)
STOP (DLY = 0)
SYSCLK
NOTE:
Figure 11-5. STOP Exit and Fast STOP Recovery
(NOLHM=1, CME=0, DLY=X)
If Limp home mode is disabled (V
CME (or FCME) bit is cleared, the MCU goes into STOP mode when a
STOP instruction is executed.
If EXTALi clock is present then exit from STOP will occur normally using
this clock. Under this condition, DLY should always be set to allow the
crystal to stabilise and minimise the risk of code runaway. With DLY=1
execution resumes after a delay of 4096 XCLK cycles.
The external clock signal should stabilise within the 4096 reset counter
cycles. Use of DLY=0 is not recommended due to this requirement.
0 --> 4096
PLLCLK (L.H.)
Clock Functions
Restore PLLCLK or EXTALi
Restore BCSP
DDPLL
Limp-Home and Fast STOP Recovery modes
=V
SS
or NOLHM bit set) and the
Clock Functions
Technical Data
149