MC912D60CCPVE Freescale Semiconductor, MC912D60CCPVE Datasheet - Page 188

• Manufacturer Part Number: MC912D60CCPVE
• Description: IC MCU 16BIT 112-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HC12r

Specifications of MC912D60CCPVE

• Core Processor: CPU12
• Core Size: 16-Bit
• Speed: 8MHz
• Connectivity: CAN, MI Bus, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 68
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x8/10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 112-LQFP
• Processor Series: HC912D
• Core: HC12
• Data Bus Width: 16 bit
• Data Ram Size: 2 KB
• Interface Type: CAN, SCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 86
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Oscillator
12.4.3.2 General Specifications
Technical Data
188
The following limitations apply to every system:
3. Within this range, choose the EXTAL–XTAL capacitance closest
4. If the ideal component is between two valid component values (the
5. Choose the size of the XTAL–VSS capacitance equal to the
6. If the frequency of the crystal falls between listed values,
7. The maximum allowed capacitor is the highest listed component,
•
•
•
variation or particle contamination).
to (C
maximum ESR is sufficient for both component values), then
choose the component with the highest maximum ESR or choose
an available component between the two listed values.
closest available size to (C
determine the appropriate component for the listed frequency
values on either side and extrapolate.
and the minimum allowed capacitor is the lowest listed
component. ‘NA’ or ‘Not Allowed’ means the listed component is
not valid or allowed for the given frequency, Shunt Capacitance,
and VDDPLL setting.
Ceramic resonators with integrated components should not be
used, as they are designed for Pierce-configured oscillators.
Series cut resonators should not be used. Use parallel cut instead.
The Load Capacitance should be 12pF or higher, preferably
greater than 15pF.
EXTAL–XTAL
Oscillator
= 2*CL – 1pF).
XTAL–VSS
= 0.82*C
MC68HC912D60A — Rev. 3.1
Freescale Semiconductor
EXTAL–XTAL
).