MC912D60CCPVE Freescale Semiconductor, MC912D60CCPVE Datasheet - Page 59

• Manufacturer Part Number: MC912D60CCPVE
• Description: IC MCU 16BIT 112-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HC12r

Specifications of MC912D60CCPVE

• Core Processor: CPU12
• Core Size: 16-Bit
• Speed: 8MHz
• Connectivity: CAN, MI Bus, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 68
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x8/10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 112-LQFP
• Processor Series: HC912D
• Core: HC12
• Data Bus Width: 16 bit
• Data Ram Size: 2 KB
• Interface Type: CAN, SCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 86
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

MC68HC912D60A — Rev. 3.1
Freescale Semiconductor
1. In 80-pin QFP package only TxCAN and RxCAN are available. PortCAN[2:7] pins should either be defined as outputs or
Port Name
PCAN[7:0]
PAD1[7:0]
PAD0[7:0]
Port CAN
Port AD1
Port AD0
PB[7:0]
PE[7:0]
PP[7:0]
PS[7:0]
PT[7:0]
PA[7:0]
have their pull-ups enabled.
Port A
Port B
Port E
Port P
Port S
Port T
72, 73
25–28,
76–80,
14–11,
80-pin
48–41
23–16
60–53
37–40
70–63
Pin Numbers
N/A
1–3
7–4
(1)
Table 3-3
84/82/80
83/81/79
108–112
/78/76/7
/77/75/7
112-pin
4/72/70
3/71/69
98–105
36–39,
18–15,
64–57
31–24
53–56
96–89
1–3
7–4
Setting the RDPT bit in the TMSK2 register configures all port T outputs
to have reduced drive levels. Levels are at normal drive capability after
reset. The TMSK2 register can be read or written anytime after reset
Refer to
,
.
MC68HC912D60A Port Description Summary
Data Direction
DDRS ($00D7)
DDRT ($00AF)
DDRA ($0002)
DDRB ($0003)
DDRE ($0009)
DDRP ($0057)
PE[7:2] In/Out
(Address)
Enhanced Capture
PE[1:0] In
Register
In/Out
In/Out
In/Out
In/Out
In/Out
In/Out
Pinout and Signal Descriptions
In
In
Port A and port B pins are used for address and data in
DDRA and DDRB are not in the address map in expanded
Analog-to-digital converter 1 and general-purpose I/O.
Analog-to-digital converter 0 and general-purpose I/O.
General purpose I/O. PCAN[1:0] are used with the
Mode selection, bus control signals and interrupt service
General-purpose I/O. PP[3:0] are used with the pulse-width
Serial communications interfaces 1 and 0 and serial
General-purpose I/O when not enabled for input capture
expanded modes. The port data registers are not in the
address map during expanded and peripheral mode
operation. When in the map, port A and port B can be
read or written any time.
or peripheral modes.
MSCAN12 module and cannot be used as I/O.
request signals; or general-purpose I/O.
modulator when enabled.
peripheral interface subsystems and general-purpose I/O.
and output compare in the timer and pulse accumulator
subsystem.
Timer.
Description
Pinout and Signal Descriptions
Technical Data
Port Signals
59