HD6417720BP133BV Renesas Electronics America, HD6417720BP133BV Datasheet - Page 1030

• Manufacturer Part Number: HD6417720BP133BV
• Description: SH3-DSP, WITH USB AND LCDC, PB-F
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of HD6417720BP133BV

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 133MHz
• Connectivity: FIFO, I²C, IrDA, MMC, SCI, SD, SIO, SIM, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 117
• Program Memory Type: ROMless
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.4 V ~ 1.6 V
• Data Converters: A/D 4x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 256-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Section 29 PC Card Controller (PCC)
Page 970 of 1414
Bit
4
3
2
Bit Name
P0SC
P0CDC
P0RC
Initial Value
0
0
0
R/W
R/W
R/W
R/W
Description
PCC0 Status Change
Indicates a change in the value of the STSCHG of the PC card
when the PC card connected to area 6 is the I/O card interface
type. When the STSCHG is changed from 1 to 0, the P0SC bit
is set to 1. When STSCHG is not changed, the P0SC bit
remains at 0. Write 0 to bit 4 when this bit is set to 1 in order to
clear this bit to 0. This bit is not changed if 1 is written. This bit
always reads 0 on the IC memory card interface.
0: STSCHG of the PC card is not changed when the PC card
1: STSCHG of the PC card is changed from 1 to 0 when the
PCC0 Card Detect Change
Indicates a change in the value of the CD1 and CD2 in the PC
card connected to area 6. When the CD1 and CD2 values are
changed, the P0CDC bit is set to 1. When the values are not
changed, the P0CDC bit remains at 0. Write 0 to bit 3 in order
to clear this bit to 0. This bit is not changed if 1 is written.
0: CD1 and CD2 in the PC card are not changed
1: CD1 and CD2 in the PC card are changed
PCC0 Ready Change
Indicates a change in the value of the RDY/BSY of the PC
card when the PC card connected to area 6 is the IC memory
card interface type. When the RDY/BSY is changed from 0 to
1, the P0RC bit is set to 1. When the RDY/ BSY is not
changed, the P0RC bit remains at 0. Write 0 to bit 2 in order to
clear this bit to 0. This bit is not changed if 1 is written. This bit
always reads 0 on the I/O card interface.
0: RDY/BSY in the PC card is not changed when the PC card
1: RDY/BSY in the PC card is changed from 0 to 1 when the
is on the I/O card interface
PC card is on the I/O card interface
is on the IC memory card interface
PC card is on the IC memory card interface
SH7720 Group, SH7721 Group
R01UH0083EJ0400 Rev. 4.00
Sep 21, 2010