HD6417720BP133BV Renesas Electronics America, HD6417720BP133BV Datasheet - Page 1159

• Manufacturer Part Number: HD6417720BP133BV
• Description: SH3-DSP, WITH USB AND LCDC, PB-F
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of HD6417720BP133BV

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 133MHz
• Connectivity: FIFO, I²C, IrDA, MMC, SCI, SD, SIO, SIM, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 117
• Program Memory Type: ROMless
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.4 V ~ 1.6 V
• Data Converters: A/D 4x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 256-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

SH7720 Group, SH7721 Group
• Not in the data busy state is confirmed. If the data busy state is entered, the data busy state is
• After data transfer (after DRPI is detected), check whether the data busy state is entered. If the
• The CMDOFF bit is set to 1 and command sequence is ended.
• When the CRC error (CRCERI) or the command timeout error (CTERI) occurs during
• When the CRC error (CRCERI), write error (WRERI), or the data timeout error (DTERI)
Note: Access from the DMAC to the FIFO should be performed by byte or longword data.
R01UH0083EJ0400 Rev. 4.00
Sep 21, 2010
detected by the data busy end flag (DBSYI).
data busy state is entered, the end of the data busy state is detected by the data busy end flag
(DBSYI).
command response reception, write 1 to the CMDOFF bit.
occurs during write data transmission, write 1 to the CMDOFF bit and set DMACR to H'00 to
clear the FIFO.
Section 31 MultiMediaCard Interface (MMCIF)
Page 1099 of 1414