UPD70F3786GJ-GAE-AX Renesas Electronics America, UPD70F3786GJ-GAE-AX Datasheet - Page 1648

• Manufacturer Part Number: UPD70F3786GJ-GAE-AX
• Description: MCU 32BIT V850ES/JX3-E 144-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Er

Specifications of UPD70F3786GJ-GAE-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: CAN, CSI, EBI/EMI, Ethernet, I²C, UART/USART, USB
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 100
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 124K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

30.4 Operation
30.4.1 To use for internal reset signal
1646
Depending on the setting of the LVIM.VIMD bit, an interrupt signal (INTLVI) or an internal reset signal is generated.
How to specify each operation is described below, together with timing charts.
<To start operation>
<1> Mask the interrupt of LVI.
<2> Set the LVIM.LVION bit to 1 (to enable operation).
<3> Insert a wait cycle of 0.2 ms (max.) or more by software.
<4> By using the LVIM.LVIF bit, check if the supply voltage > detected voltage.
<5> Set the LVIMD bit to 1 (to generate an internal reset signal).
Caution If the LVIMD bit is set to 1, the contents of the LVIM register cannot be changed until a reset
LVI reset request signal
LVI detected voltage
Supply voltage (V
Internal reset signal
LVI detected signal
request other than LVI is generated.
(2.95 V (TYP.))
(active low)
LVION bit
Figure 30-2. Operation Timing of Low-Voltage Detector (LVIMD Bit = 1)
DD
)
CHAPTER 30 LOW-VOLTAGE DETECTOR (LVI)
Delay
User’s Manual U19601EJ2V0UD
Clear
Delay
Time