UPD70F3786GJ-GAE-AX Renesas Electronics America, UPD70F3786GJ-GAE-AX Datasheet - Page 230

• Manufacturer Part Number: UPD70F3786GJ-GAE-AX
• Description: MCU 32BIT V850ES/JX3-E 144-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Er

Specifications of UPD70F3786GJ-GAE-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: CAN, CSI, EBI/EMI, Ethernet, I²C, UART/USART, USB
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 100
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 124K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

6.5
6.5.1
output by the PLL function or the clock-through mode can be selected as the operating clock of the CPU and on-chip
peripheral functions.
6.5.2
228
In the V850ES/JH3-E and V850ES/JJ3-E, an operating clock that is 8 times higher than the oscillation frequency
When PLL function is used (×8): Input clock = 3.0 to 6.25 MHz (output: 24 to 50 MHz)
Clock-through mode:
(1) PLL control register (PLLCTL)
Cautions 1. When the PLLON bit is cleared to 0, the SELPLL bit is automatically cleared to 0 (clock-
PLL Function
The PLLCTL register is an 8-bit register that controls the PLL function.
This register can be read or written in 8-bit or 1-bit units.
Reset sets this register to 01H.
Overview
Registers
2. The SELPLL bit can be set to 1 only when the PLL clock frequency is stabilized. If not
PLLCTL
through mode).
(unlocked), "0" is written to the SELPLL bit if data is written to it.
After reset: 01H
SELPLL
PLLON
0
1
0
1
0
CHAPTER 6 CLOCK GENERATION FUNCTION
PLL stopped
PLL operating
(After PLL operation starts, a lockup time is required for frequency stabilization)
Clock-through mode
PLL mode
Input clock = 3.0 to 6.25 MHz (output: 3.0 to 6.25 MHz)
R/W
0
Address: FFFFF82CH
User’s Manual U19601EJ2V0UD
0
CPU operation clock selection register
PLL operation stop register
0
0
0
SELPLL
< >
PLLON
< >