MMC2107CFCPV33 Freescale Semiconductor, MMC2107CFCPV33 Datasheet - Page 124

• Manufacturer Part Number: MMC2107CFCPV33
• Description: IC MCU 33MHZ 128K FLASH 144-LQFP
• Manufacturer: Freescale Semiconductor
• Series: MCorer

Specifications of MMC2107CFCPV33

• Core Processor: M210
• Core Size: 32-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LQFP
• Data Bus Width: 32 bit
• Data Ram Size: 8 KB
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 33 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 4 bit
• Operating Supply Voltage: 0 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No RoHS Version Available

Signal Description
4.5.3.8 Address Bus (A[22:0])
4.5.3.9 Enable Byte (EB[3:0])
4.5.3.10 Chip Select (CS[3:0])
4.5.3.11 Output Enable (OE)
4.5.4 Edge Port Signals
4.5.4.1 External Interrupts (INT[7:6])
4.5.4.2 External Interrupts (INT[5:2])
Technical Data
124
These output signals provide the address for the current bus transfer.
These output signals indicate which byte of data is valid during external
cycles.
These output signals select external devices for external bus
transactions.
This output signal indicates when an external device can drive data
during external read cycles.
These signals are used by the edge port module.
These bidirectional signals function as either external interrupt sources
or GPIO. Also, these signals may be used to reflect the internal TSIZ[1:0]
signals and externally to provide an indication of the M•CORE transfer
size.
These bidirectional signals function as either external interrupt sources
or GPIO. Also, these signals may be used to reflect the internal
PSTAT[3:0] signals and externally to provide an indication of the
M•CORE processor status.
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
Signal Description
MMC2107 – Rev. 2.0
MOTOROLA