MMC2107CFCPV33 Freescale Semiconductor, MMC2107CFCPV33 Datasheet - Page 125

• Manufacturer Part Number: MMC2107CFCPV33
• Description: IC MCU 33MHZ 128K FLASH 144-LQFP
• Manufacturer: Freescale Semiconductor
• Series: MCorer

Specifications of MMC2107CFCPV33

• Core Processor: M210
• Core Size: 32-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LQFP
• Data Bus Width: 32 bit
• Data Ram Size: 8 KB
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 33 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 4 bit
• Operating Supply Voltage: 0 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No RoHS Version Available

4.5.4.3 External Interrupts (INT[1:0])
4.5.5 Serial Peripheral Interface Module Signals
4.5.5.1 Master Out/Slave In (MOSI)
4.5.5.2 Master In/Slave Out (MISO)
4.5.5.3 Serial Clock (SCK)
4.5.5.4 Slave Select (SS)
4.5.6 Serial Communications Interface Module Signals
4.5.6.1 Receive Data (RXD1 and RXD2)
MMC2107 – Rev. 2.0
MOTOROLA
These bidirectional signals function as either external interrupt sources
or GPIO.
These signals are used by the SPI module and may also be configured
to be discrete I/O signals.
This signal is the serial data output from the SPI in master mode and the
serial data input in slave mode.
This signal is the serial data input to the SPI in master mode and the
serial data output in slave mode.
The serial clock synchronizes data transmissions between master and
slave devices. SCK is an output if the SPI is configured as a master and
SCK is an input if the SPI is configured as a slave.
This I/O signal is the peripheral chip select signal in master mode and is
an active-low slave select in slave mode.
These signals are used by the two SCI modules.
These signals are used for the SCI receiver data input and are also
available for GPIO when not configured for receiver operation.
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
Signal Description
Signal Descriptions
Signal Description
Technical Data
125