MMC2107CFCPV33 Freescale Semiconductor, MMC2107CFCPV33 Datasheet - Page 323

• Manufacturer Part Number: MMC2107CFCPV33
• Description: IC MCU 33MHZ 128K FLASH 144-LQFP
• Manufacturer: Freescale Semiconductor
• Series: MCorer

Specifications of MMC2107CFCPV33

• Core Processor: M210
• Core Size: 32-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LQFP
• Data Bus Width: 32 bit
• Data Ram Size: 8 KB
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 33 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 4 bit
• Operating Supply Voltage: 0 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No RoHS Version Available

15.8.4 Pulse Accumulator
15.8.4.1 Event Counter Mode
MMC2107 – Rev. 2.0
MOTOROLA
NOTE:
NOTE:
The pulse accumulator (PA) is a 16-bit counter that can operate in two
modes:
The PA mode bit, PAMOD, selects the mode of operation.
The minimum pulse width for the PAI input is greater than two module
clocks.
Clearing the PAMOD bit configures the PA for event counter operation.
An active edge on the PAI pin increments the PA. The PA edge bit,
PEDGE, selects falling edges or rising edges to increment the PA.
An active edge on the PAI pin sets the PA input flag, PAIF. The PA input
interrupt enable bit, PAI, enables the PAIF flag to generate interrupt
requests.
The PAI input and timer channel 3 use the same pin. To use the PAI
input, disconnect it from the output logic by clearing the channel 3 output
mode and output level bits, OM3 and OL3. Also clear the channel 3
output compare 3 mask bit, OC3M3.
The PA counter registers, TIMPACNTH/L, reflect the number of active
input edges on the PAI pin since the last reset.
The PA overflow flag, PAOVF, is set when the PA rolls over from $FFFF
to $0000. The PA overflow interrupt enable bit, PAOVI, enables the
PAOVF flag to generate interrupt requests.
The PA can operate in event counter mode even when the timer enable
bit, TIMEN, is clear.
1. Event counter mode — Counts edges of selected polarity on the
2. Gated time accumulation mode — Counts pulses from a
Freescale Semiconductor, Inc.
For More Information On This Product,
pulse accumulator input pin, PAI
divide-by-64 clock
Timer Modules (TIM1 and TIM2)
Go to: www.freescale.com
Timer Modules (TIM1 and TIM2)
Functional Description
Technical Data
323