MMC2107CFCPV33 Freescale Semiconductor, MMC2107CFCPV33 Datasheet - Page 443

• Manufacturer Part Number: MMC2107CFCPV33
• Description: IC MCU 33MHZ 128K FLASH 144-LQFP
• Manufacturer: Freescale Semiconductor
• Series: MCorer

Specifications of MMC2107CFCPV33

• Core Processor: M210
• Core Size: 32-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LQFP
• Data Bus Width: 32 bit
• Data Ram Size: 8 KB
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 33 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 4 bit
• Operating Supply Voltage: 0 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No RoHS Version Available

18.9 Functional Description
18.9.1 QADC Bus Accessing
18.9.2 External Multiplexing
18.9.2.1 External Multiplexing Operation
MMC2107 – Rev. 2.0
MOTOROLA
This subsection provides a functional description of the QADC.
Coherency of results read across multiple cycles is not guaranteed.
External multiplexer chips concentrate a number of analog signals onto
a few inputs to the analog converter. This is helpful in applications that
need to convert more analog signals than the A/D converter can
normally provide. External multiplexing also puts the multiplexed chip
closer to the signal source. This minimizes the number of analog signals
that need to be shielded due to the proximity to noisy high speed digital
signals at the microcontroller chip.
For example, four 4-input multiplexer chips can be put at the connector
where the analog signals first arrive on the computer board. As a result,
only four analog signals need to be shielded from noise as they
approach the microcontroller chip, rather than having to protect 16
analog signals. However, external multiplexer chips may introduce
additional noise and errors if not properly utilized. Therefore, it is
necessary to maintain low “on” resistance (the impedance of an analog
switch when active within a multiplexed chip) and insert a low pass filter
(R/C) on the input side of the multiplexed chip.
The QADC can use from one to four or two dual external multiplexer
chips to expand the number of analog signals that may be converted. Up
to 16 analog channels can be converted through external multiplexer
selection. The externally multiplexed channels are automatically
selected from the channel field of the conversion command word (CCW)
table, the same as internally multiplexed channels. The software selects
the external multiplexed mode by setting the MUX bit in control register 0
(QACR0).
Freescale Semiconductor, Inc.
For More Information On This Product,
Queued Analog-to-Digital Converter (QADC)
Go to: www.freescale.com
Queued Analog-to-Digital Converter (QADC)
Functional Description
Technical Data
443