MC908AZ60ACFU Freescale Semiconductor, MC908AZ60ACFU Datasheet - Page 195

• Manufacturer Part Number: MC908AZ60ACFU
• Description: IC MCU FLASH 8.4MHZ 60K 64QFP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC908AZ60ACFU

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8.4MHz
• Connectivity: CAN, SCI, SPI
• Peripherals: LVD, POR, PWM
• Number Of I /o: 52
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 15x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

SCTIE — SCI Transmit Interrupt Enable Bit
TCIE — Transmission Complete Interrupt Enable Bit
SCRIE — SCI Receive Interrupt Enable Bit
ILIE — Idle Line Interrupt Enable Bit
TE — Transmitter Enable Bit
Freescale Semiconductor
This read/write bit enables the SCTE bit to generate SCI transmitter CPU interrupt requests. Setting
the SCTIE bit in SCC3 enables the SCTE bit to generate CPU interrupt requests. Reset clears the
SCTIE bit.
This read/write bit enables the TC bit to generate SCI transmitter CPU interrupt requests. Reset clears
the TCIE bit.
This read/write bit enables the SCRF bit to generate SCI receiver CPU interrupt requests. Setting the
SCRIE bit in SCC3 enables the SCRF bit to generate CPU interrupt requests. Reset clears the SCRIE
bit.
This read/write bit enables the IDLE bit to generate SCI receiver CPU interrupt requests. Reset clears
the ILIE bit.
Setting this read/write bit begins the transmission by sending a preamble of 10 or 11 1s from the
transmit shift register to the TxD pin. If software clears the TE bit, the transmitter completes any
transmission in progress before the TxD returns to the idle condition (1). Clearing and then setting TE
during a transmission queues an idle character to be sent after the character currently being
transmitted. Reset clears the TE bit.
1 = SCTE enabled to generate CPU interrupt
0 = SCTE not enabled to generate CPU interrupt
1 = TC enabled to generate CPU interrupt requests
0 = TC not enabled to generate CPU interrupt requests
1 = SCRF enabled to generate CPU interrupt
0 = SCRF not enabled to generate CPU interrupt
1 = IDLE enabled to generate CPU interrupt requests
0 = IDLE not enabled to generate CPU interrupt requests
1 = Transmitter enabled
0 = Transmitter disabled
Address:
Writing to the TE bit is not allowed when the enable SCI bit (ENSCI) is clear.
ENSCI is in SCI control register 1.
Reset:
Read:
Write:
MC68HC908AZ60A • MC68HC908AS60A • MC68HC908AS60E Data Sheet, Rev. 6
SCTIE
$0014
Bit 7
0
Figure 18-12. SCI Control Register 2 (SCC2)
TCIE
6
0
SCRIE
5
0
NOTE
ILIE
4
0
TE
3
0
RE
2
0
RWU
1
0
Bit 0
SBK
0
I/O Registers
195