AXT650124 Panasonic Electric Works, AXT650124 Datasheet - Page 116

• Manufacturer Part Number: AXT650124
• Description: CONN HEADER F4S .4MM 50POS SMD
• Manufacturer: Panasonic Electric Works
• Series: F4Sr

Specifications of AXT650124

• Connector Type: Header, Center Strip Contacts
• Number Of Positions: 50
• Pitch: 0.016" (0.40mm)
• Number Of Rows: 2
• Mounting Type: Surface Mount
• Features: Solder Retention
• Contact Finish: Gold
• Mated Stacking Heights: 1mm
• Height Above Board: 0.033" (0.84mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Contact Finish Thickness: -
• Other names: 255-2399-2

SPECIFICATIONS
1. Characteristics
2. Material and surface treatment
http://www.mew.co.jp/ac/e/
Electrical
characteristics
Mechanical
characteristics
Environmental
characteristics
Insertion and
removal life
Resistance to
soldering heat
Header block
Socket
Shell
Part name
Rated current
Rated voltage
Insulation resistance
Breakdown voltage
Contact resistance
Composite insertion force
Lock strength
Holding force for terminal
Wire tensile strength (mated) 5N/30 sec.
Ambient temperature
Storage environment
Thermal shock resistance
(header and socket mated)
Humidity resistance
(header and socket mated)
Saltwater spray resistance
(header and socket mated)
H
(header and socket mated)
Mechanical life
Socket
Header
2
Resin-molding portion
Resin-molding portion
S resistance
Item
Retention fitting
Insulating tape
Contact
Shell
Post
LCP resin (UL94V-0), Black
LCP resin (UL94V-0), Black
0.3A/terminal (Max. 5A at total contacts)
60V AC/DC
Min. 1, 000 MΩ (initial)
200 V AC for 1 minute
Max. 90mΩ
Max. 50N (40 contacts)(initial)
Min. 20N/30 sec. (40 contacts)(initial)
Socket connector: Min. 0.49N,
Socket retention fitting: Min. 0.98N
–55°C to +85°C
–55°C to +85°C (Product unit)
–40°C to +50°C (Embossed packing style)
–40°C to +50°C (Tray packing style)
5 cycles,
insulation resistance min. 100MΩ,
contact resistance max. 25mΩ
120 hours,
insulation resistance min. 100MΩ,
contact resistance max. 25mΩ
24 hours,
insulation resistance min. 100MΩ,
contact resistance max. 25mΩ
48 hours,
contact resistance max. 25mΩ
30 times, contact resistance max. 25mΩ
Infrared reflow soldering:
Peak temperature 260°C max.
(Surface temperature of PC board adjacent to connector
terminals)
Soldering iron: 350°C for 3 seconds max.
Connected part pulse heat:
Peak temperature 290°C for 3 seconds max.
(Heater head must not directly contact connector molded part.)
Shell retaining part
Soldering iron: 350°C for 3 seconds max.
Polyimide resin
Stainless steel
Copper alloy
Copper alloy
Copper alloy
Material
300°C for 5 seconds max.
300°C for 5 seconds max.
Specifications
Contact portion: Ni plating on base, Au plating on surface (Min. 0.1µm)
Solder portion: Ni plating on base, Au plating on surface (except for thick of terminal)
Ni plating on base, Pd + Au flash on surface
Contact portion: Ni plating on base, Au plating on surface (Min. 0.1µm)
Wire soldering terminal: Ni plating on base, Au plating on surface
Ni plating on base, Pd + Au flash on surface
Matsushita Electric Works, Ltd.
Maximum current that one contact can conduct.
Using 250 V DC megger (applied for 1 minute)
Rated voltage is applied for one minute and check for
short circuit or damage with a detection current of 1mA.
Measured based on the milliohmmeter measurement
method of JIS C 5402
Measures the maximum load in the contact axial
direction until removal
No breakage at mated part when 40 restrained pins are
pulled by at least 0.98 N.
No freezing at low temperatures
No freezing at low temperatures
Sequence
1. –55 °C, 30 minutes
2. 25
3. 85 °C, 30 minutes
4. 25
Bath temperature 40±2°C,
humidity 90 to 95% R.H.
Bath temperature 35±2°C,
saltwater concentration 5±1%
Bath temperature 40±2°C,
gas concentration 3±1 ppm, humidity 75 to 80% R.H.
Repeated insertion and removal speed of
max. 200 times/hours
Surface treatment
+3
+10
−5
+10
−5
0
−3
0
°C, Max. 5 minutes
°C, Max. 5 minutes
—
—
—
Conditions
—
—
AXC5
119