AXT650124 Panasonic Electric Works, AXT650124 Datasheet - Page 147

• Manufacturer Part Number: AXT650124
• Description: CONN HEADER F4S .4MM 50POS SMD
• Manufacturer: Panasonic Electric Works
• Series: F4Sr

Specifications of AXT650124

• Connector Type: Header, Center Strip Contacts
• Number Of Positions: 50
• Pitch: 0.016" (0.40mm)
• Number Of Rows: 2
• Mounting Type: Surface Mount
• Features: Solder Retention
• Contact Finish: Gold
• Mated Stacking Heights: 1mm
• Height Above Board: 0.033" (0.84mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Contact Finish Thickness: -
• Other names: 255-2399-2

AXJ5
SPECIFICATIONS
1. Characteristics
2. Material and surface treatment
150
Electrical
characteristics
Mechanical
characteristics
Lifetime
characteristics
Environmental
characteristics
Soldering
temperature
resistance
Resin-molding portion
Metal parts
Matsushita Electric Works, Ltd.
Part name
Item
Rated current
Rated voltage
Contact resistance
Insulation resistance
Breakdown voltage
Electrostatic capacity
Composite insertion
force (initial)
Insertion and removal
life
Ambient temperature
Storage temperature
Vibration resistance
Impact resistance
Heat resistance
(mated)
Humidity resistance
(mated)
Reflow soldering
Manual soldering
Contact
Shell
When applying current only to signal terminals:
1.0 A (for terminal No. 2, 3 and 4)
When applying current to the power terminal:
1.8 A (for terminal No. 1 and 5),
0.5 A (for terminal No. 2, 3 and 4)
30V DC/AC
Max. 30mΩ
Min. 100MΩ
100V AC
(Dielectric breakdown must not occur during a 1 min.
application)
Max. 2pF
Max. 35N
10,000 times
Contact resistance: Max. 40 mΩ
Composite insertion force: Max. 35N
Composite removal force: Min. 8 N
Appearance: No abnormality
–55°C to 85°C
–55°C to 85°C (–40°C to 50°C for packaging materials)
Discontinuity: Max. 1µs
Contact resistance: Max. 40mΩ
Appearance: No abnormality
Discontinuity: Max. 1µs
Contact resistance: Max. 40mΩ
Appearance: No abnormality
250 hours
Contact resistance: Max. 40mΩ
Breakdown voltage: 100V AC dielectric breakdown must
not occur during a one-minute application.
Insulation resistance: Min. 100MΩ
Appearance: No abnormality
7 cycles
Contact resistance: Max. 40mΩ
Breakdown voltage: 100V AC dielectric breakdown must
not occur during a one-minute application.
Insulation resistance: Min. 100MΩ
Appearance: No abnormality
Peak temperature: Max. 260°C
300±10°C: Max. 5 s
350±10°C: Max. 3 s
Heat-resistant resin (UL94V-0)
Copper alloy
Stainless steel
Material
Specifications
Contact portion: Ni plating on base, Au plating on surface
Terminal portion: Ni plating on base, Au plating on surface (Except the cut ends)
Ni plating on base, Sn plating on surface (Except the cut ends)
EIA-364-23 (Inductive resistance to wire is not included)
EIA-364-21 Using 100V DC megger
EIA-364-20
Detection current: 1mA
EIA-364-30
(Measure it between the adjacent terminals of the unmated
connector at a frequency of 1 kHz.)
EIA-364-13 Insert and remove a plug at a speed of 12.5 mm/min.
EIA-364-09
Repeated insertion and removal speed of max. 500 times/hours
(Mechanical insertion and removal)
No freezing or condensation in low temperatures
No freezing or condensation in low temperatures
EIA-364-28
Apply vibration in three directions including the mating axis that
are perpendicular to one another for 15 minutes respectively with
a 100 mA DC current applied.
Cord length: 100mm Fix the cord end.
EIA-364-27
Acceleration: 294m/s
Duration: 11 ms,
Application directions: 6 surfaces (X, Y, and Z directions)
Number of applications: 3 times respectively (Total: 18 times)
Cord length: 100mm Fix the cord end.
EIA-364-17
Temperature: 85±2°C
EIA-364-31 Method III
Surface treatment
2
(30G)
—
Conditions
http://www.mew.co.jp/ac/e/