AXT650124 Panasonic Electric Works, AXT650124 Datasheet - Page 17

• Manufacturer Part Number: AXT650124
• Description: CONN HEADER F4S .4MM 50POS SMD
• Manufacturer: Panasonic Electric Works
• Series: F4Sr

Specifications of AXT650124

• Connector Type: Header, Center Strip Contacts
• Number Of Positions: 50
• Pitch: 0.016" (0.40mm)
• Number Of Rows: 2
• Mounting Type: Surface Mount
• Features: Solder Retention
• Contact Finish: Gold
• Mated Stacking Heights: 1mm
• Height Above Board: 0.033" (0.84mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Contact Finish Thickness: -
• Other names: 255-2399-2

NOTES ON USE FOR I/O CONNECTOR SERIES
Handling
1. Handling plugs
Please warn the end-user of the following
in the instruction manual or similar.
1) Do not apply excessive force when
inserting. Doing so could damage the
receptacle body or plug housing.
2) The plug orientation is designed to
avoid plugging in the wrong way. Be sure
of the orientation of the plug. Do not force
in a plug. Doing so could damage the
receptacle body or plug housing.
3) When removing a plug from a
connector with a lock mechanism, do not
remove it before the lock has been
Other Notes
1. Attach a Cover
We recommend using a cover to prevent
dirt and dust from entering the receptacle
during use. Design the cover for long-
term use so that it can withstand
repeated use and be easily removed from
the main unit.
2. Plug Harness Finishing
Plug Assembly Procedure instruction
sheets are available. Please check them
with your assembly procedures.
3. Coating Materials
If you coat the PCB after soldering for
insulation and to prevent wear, make sure
that the coating does not adhere to the
connector.
20
Matsushita Electric Works, Ltd.
completely released, or apply excessive
force by twisting the plug. Doing so could
damage the plug or adversely affect the
locking strength during the next mating
operation.
4) Do not pull the plug out by the cable, or
otherwise remove the plug in an improper
fashion. Doing so could exert undue
stress on the bushing or cable and
contact solder, and cause the connection
to break. Be sure to release the lock and
grasp the plug when disconnecting.
5) The plug is not dust or water resistant.
4. To prevent end-users from
disassembling the plug, please warn
them in the instruction manual, or, for
the type with screws, provide a screw
lock with suitable marking to prevent
disassembly.
Regarding general notes,
please refer to page 17.
2. PCB handling after mounting of
receptacle and plug (Board mounting
type)
1) Make sure that PCB warping is no
more than 0.03 mm over the entire
connector length.
2) When assembling PCBs or storing
them in block assemblies, make sure that
undue weight is not exerted on a stacked
connector.
3) Be sure not to allow external pressure
to act on connectors when assembling
PCBs or moving in block assemblies.
http://www.mew.co.jp/ac/e/
(Common)