AXT650124 Panasonic Electric Works, AXT650124 Datasheet - Page 171

• Manufacturer Part Number: AXT650124
• Description: CONN HEADER F4S .4MM 50POS SMD
• Manufacturer: Panasonic Electric Works
• Series: F4Sr

Specifications of AXT650124

• Connector Type: Header, Center Strip Contacts
• Number Of Positions: 50
• Pitch: 0.016" (0.40mm)
• Number Of Rows: 2
• Mounting Type: Surface Mount
• Features: Solder Retention
• Contact Finish: Gold
• Mated Stacking Heights: 1mm
• Height Above Board: 0.033" (0.84mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Contact Finish Thickness: -
• Other names: 255-2399-2

(AXR1)
NOTES
1. Receptacle
1) About attaching the cover
The construction of this product is not
drip proof or dustproof. We recommend
that you cover the receptacle to prevent
entry of foreign matter such as dust and
dirt, and liquids such as perspiration. The
cover should be durable enough to
withstand repeated, long-term use, and
should not detach readily from the unit.
2) PCB design
Use the recommended design to ensure
that the mechanical strength of the
soldered section of the receptacle
terminal is maintained.
2. Plug
1) The amount of floating on the plug side
of the product is ±1.0mm in the radial
direction, and 0.4mm to 2.0mm in the
axial direction. When designing the
bodies of hands-free goods or inspection
jigs, the clearance with the receptacle on
the body of the mobile phone must be
within these limits. Also, use a
construction for the body that prevents
over stroke in the axial direction.
2) When designing hands-free goods and
inspection jigs, provide a means of
securing the cord so that stress does not
act on the plug body if the cord is pulled.
3) The construction is such that the edge
section of the plug is exposed when the
plug is fixed to the hands-free goods.
Provide warnings in the instruction
manual to alert users to the fact that
excessive force applied to the edge
section of the plug can cause damage.
174
Matsushita Electric Works, Ltd.
4) Soldering
• Take care to ensure that solder flux
• Take care not to melt the resin sections
• Take care to avoid formation of solder
5) Before soldering the coaxial cable,
crimp the cable to the case using the ring
to secure it and ensure that no load is
applied to the soldered parts of the
coaxial cable.
6) This product is designed so that it can
be secured to either hands-free goods or
an inspection jig with a one-touch
operation. When it is installed to the body
of such a unit, ensure that it is secured
firmly.
does not adhere to the contacts. This
can result in a poor electrical
connection.
with the soldering iron.
bulbs, and to avoid shorting the plug
post to the case (3) with solder.
Regarding general notes, please refer
to page 17.
For other details, please verify with the
product specification sheets.
Plug post
Case (3)
http://www.mew.co.jp/ac/e/