AXT650124 Panasonic Electric Works, AXT650124 Datasheet - Page 237

• Manufacturer Part Number: AXT650124
• Description: CONN HEADER F4S .4MM 50POS SMD
• Manufacturer: Panasonic Electric Works
• Series: F4Sr

Specifications of AXT650124

• Connector Type: Header, Center Strip Contacts
• Number Of Positions: 50
• Pitch: 0.016" (0.40mm)
• Number Of Rows: 2
• Mounting Type: Surface Mount
• Features: Solder Retention
• Contact Finish: Gold
• Mated Stacking Heights: 1mm
• Height Above Board: 0.033" (0.84mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Contact Finish Thickness: -
• Other names: 255-2399-2

SIMPLE WIRE-PRESS CONNECTORS (AXF1, 2)
3. PC board-mount socket
Notes: 1. If you order five connectors, then we will deliver them in one box.
SPECIFICATIONS
1. Characteristics
2. Material and surface treatment
240
Electrical
characteristics
Mechanical
characteristics
Lifetime
characteristics
Environmental
characteristics
Number of contacts
4 contacts × 1 rows
4 contacts × 4 rows
2. Order the five-piece packs in units of five pieces, the tray packs of the single-row type in units of 100, and the tray packs of the four-row type in units of 50.
Matsushita Electric Works, Ltd.
Molded portion
Rated current
Rated voltage
Insulation resistance
Breakdown voltage
Contact resistance
Insertion force
Removal force
Vibration resistance
Shock resistance
Insertion and removal life
Ambient temperature
Thermal shock resistance
(mated)
Heat resistance (mated)
Humidity resistance (mated)
Temperature and humidity
cycles (mated)
Saltwater spray resistance
(mated)
Part name
Contact
Item
Self-standing brackets and Flux-tight type
Flux-tight type with self-standing brackets
Flux-tight type with self-standing brackets
With self-standing brackets type
With self-standing brackets type
Standard type
Flux-tight type
AWG20: 3A/contact, AWG22: 2A/contact,
AWG24: 1A/contact, AWG26: 0.5A/contact,
AWG28: 0.5A/contact
Max. 32V AC/DC
Min. 1,000MΩ (initial)
1,000V AC for 1 min.
Max. 30mΩ (initial)
Max. 11N
Min. 0.4N
10 to 55 Hz at the double amplitude of 1.52mm
There must be no current interruption exceeding 1 µs
during two hours of application in each of the three axis
directions.
490m/s
1 µs during three times in each of the three axis directions.
500 times, Contact resistance increase: Max.25mΩ
–35 to +75°C
50 cycles, Contact resistance increase: Max. 25mΩ,
Insulation resistance Min. 100MΩ
85°C, 240 hours, Contact resistance increase:
Max. 25mΩ, Insulation resistance Min. 100MΩ
96 hours, Contact resistance increase: Max. 25mΩ,
Insulation resistance Min. 100MΩ
10 cycles, Contact resistance increase: Max. 25mΩ,
Insulation resistance Min. 100MΩ
48 hours (continuous), Contact resistance increase:
Max. 25mΩ, Insulation resistance Min. 100MΩ
Body: PBT resin (UL94V-0)
Top cover: Polycarbonate resin (UL94V-0)
Bottom cover: PBT resin (UL94V-0)
Copper alloy
2
, There must be no current interruption exceeding
Specifications
Material
Part number
AXF21143T
AXF21144T
AXF21441∗
AXF21442∗
AXF21443∗
AXF21444∗
100 pieces (Tray package)
Asterisk “∗” mark on end of
Part No.;
C: 5 pieces (Package)
T: 50 pieces (Tray package)
Inner package (Carton/Tray)
Measured after one minute of voltage application by
a 500 V DC megger.
Rated voltage is applied for one minute and check for short
circuit or damage with a detection current of 1mA.
Measured based on the HB4338B measurement method
of JIS C 5402
Including insertion resistance of the lock lever
Measured the removal force with the lock released.
MIL-STD-202F, METHOD204G
Max. 100mA carrying current
MIL-STD-202F, METHOD202G
Max. 100mA carrying current
Repeat insertions and removals of the plug and the socket.
Insertion/removal speed: 200 times/hour max.
With no freezing or condensation
Restricted by the ambient temperature limit of the cable.
Sequence
1. –55 °C, 30 minutes
2. 25
3. 85 °C, 30 minutes
4. 25
To be tested at 85°C or the upper limit of the ambient
temperature, whichever is lower.
To be tested at 85°C or the upper limit of the ambient
temperature, whichever is lower.
Avoid continuous use at the maximum rated current at high
temperature.
Bath temperature: 40°C±2°C, humidity: 90 to 95 %R.H.
Follow JIS C0028.
Bath temperature: 35°C±2°C,
Saltwater concentration: 5%±1%
Contact portion: Ni plating on base, Au plating on surface,
Pressured portion: Ni plating
−3
+10
−5
+0
+10
−5
0
3
°C, Max. 5 minutes
°C, Max. 5 minutes
Surface treatment
Conditions
Packing
http://www.mew.co.jp/ac/e/
—
200 pieces (Tray package)
Asterisk “∗” mark on end of
Part No.;
C: 200 pieces (Package)
T: 200 pieces (Tray package)
Outer carton