AXT650124 Panasonic Electric Works, AXT650124 Datasheet - Page 254

• Manufacturer Part Number: AXT650124
• Description: CONN HEADER F4S .4MM 50POS SMD
• Manufacturer: Panasonic Electric Works
• Series: F4Sr

Specifications of AXT650124

• Connector Type: Header, Center Strip Contacts
• Number Of Positions: 50
• Pitch: 0.016" (0.40mm)
• Number Of Rows: 2
• Mounting Type: Surface Mount
• Features: Solder Retention
• Contact Finish: Gold
• Mated Stacking Heights: 1mm
• Height Above Board: 0.033" (0.84mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Contact Finish Thickness: -
• Other names: 255-2399-2

HARNESS FABRICATION FOR FLAT CABLE CONNECTOR
NOTES WHEN FABRICATING HARNESSES
1. Common items
1) Select the appropriate connector and
cable according to the conditions of use.
2) It is recommended that our cable
cutter and pressure welding unit be used.
3) After making the pressure welding, the
condition of the connection should be
confirmed.
4) Because there are standard terminal
layout and reverse terminal layout for
PCB type connectors, the connector
suitable for the use should be selected.
2. Cable cutter
1) The cable should be cut at right angles
to the corresponding length.
2) Use a sharp cutter for making the cut.
3) When setting the cable length, the
pressure welding portion and strain relief
coil should be considered and set
accordingly.
Example 1: MIL type and MIL type
Example 2: PCB type and PCB type
Standard terminal layout
Example 3: PCB type and MIL type
Standard terminal layout
http://www.mew.co.jp/ac/e/
Cable mark
Cable mark
Cable mark
Cable mark
Cable mark
For our product, the following cable length is necessary. (For each side)
3. Cable pressure welding
1) Bring the cable end surface in line with
the connector end surface, and set in the
groove of the cable guide of the protector.
2) When making a cable pressure
welding for a PCB type connector, it is
recommended that a spacer be used.
This can prevent breakage of the
terminals.
MIL type socket
PCB type connector
Reverse terminal layout
Reverse terminal layout
Without strain relief
With strain relief
Mini-dip type
IC type 14 to 20 contacts
IC type 24 and 40 contacts
Matsushita Electric Works, Ltd.
Cable mark
Cable mark
Cable mark
Cable mark
Cable mark
15mm
10mm
20mm
6mm
7mm
AXH
257