AXT650124 Panasonic Electric Works, AXT650124 Datasheet - Page 260

• Manufacturer Part Number: AXT650124
• Description: CONN HEADER F4S .4MM 50POS SMD
• Manufacturer: Panasonic Electric Works
• Series: F4Sr

Specifications of AXT650124

• Connector Type: Header, Center Strip Contacts
• Number Of Positions: 50
• Pitch: 0.016" (0.40mm)
• Number Of Rows: 2
• Mounting Type: Surface Mount
• Features: Solder Retention
• Contact Finish: Gold
• Mated Stacking Heights: 1mm
• Height Above Board: 0.033" (0.84mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Contact Finish Thickness: -
• Other names: 255-2399-2

EMBOSSED TAPE AND REEL
1. Nominal dimension: 600 mil 44 contacts
1) Tape dimensions (Conforming to JIS C 0806-1990 TB5624)
2. Nominal dimension: 600 mil 70 contacts
1) Tape dimensions (Conforming to JIS C 0806-1990 TB5624)
NOTES
1. As this construction stresses the
PC board’s contact ability, you should
take the PC board thickness into
account when studying creating a
socket.
The recommended PC board (made from
FR-4) thickness is at least 1.0 mm for an
SOP IC socket.
2. Reflow soldering
In order to ensure solder strength, cream
solder used should have a strength
equivalent to Sparkle Solder Paste 63-
101F (Senju Metal Industry Co., Ltd.).
3. Manual soldering the SO packages
(1) Soldering iron and solder
Use a small capacity soldering iron with a
narrow tip and thin wire solder.
Example)
(2) Soldering time
Perform soldering quickly. Solder within 5
seconds using the soldering iron
specified above.
4. If the IC’s pin pitch is uneven, it
might not fit into the socket or the IC
http://www.mew.co.jp/ac/e/
Tip diameter: 1.0 to 1.2mm
Wire solder diameter: 0.6 to 0.8mm
Capacity: 100V AC 15W
A
A
(56.0)
(52.4)
(56.0)
(52.4)
B
B
(26.2)
(26.2)
(1.75)
(1.75)
A
A
Notch oriented
on this side.
Notch oriented
on this side.
B
B
Top cover tape
Top cover tape
may become damaged. Check the IC’s
pin pitch before insertion.
5. When setting the frame, please use
one of our specialized tools, and make
sure that all frame tabs are securely
inserted.
If setting an IC embedded in a frame on
the main unit, press in the frame until
both tabs are firmly snapped into the
main unit. When the frame is full inserted,
there will be an audible snapping sound.
6. When setting the frame by hand,
lock all arms (44 and 70 contacts: 4
points) to the socket body at the same
time.
7. When removing the frame, use the
special tool available from us
designed for that purpose.
(Note 1)
(Note 1)
Emboss carrier tape
(Unit: mm)
(Good)
Same time
Emboss carrier tape
SOP IC socket
SSOP IC socket
(Not good)
2) Reel dimensions (JIS C 0806-1995R56F)
2) Reel dimensions (JIS C 0806-1995R56F)
(56.4 )
(56.4 )
+2
+2
0
0
Taping reel
Taping reel
Matsushita Electric Works, Ltd.
When replacing an IC, be sure to use the
special frame removal tool available from
us. Do not apply excessive displacement
to the arms on the frame. Doing so may
result in damage.
8. Do not bend the pins. Doing so may
result in damage.
9. Do not pull the pins with excessive
force. Doing so may cause them to
come off.
10. Unevenness in the mold color
The white socket frame shows uneven
color tones varying from white to gray.
However, the unevenness of the color
does not affect the socket performance or
functions.
The black type does not show such color
unevenness. Therefore, please choose
the black type if color unevenness can be
a problem.
Regarding general notes, please refer
to page 17.
For other details, please verify with the
product specification sheets.
Top cover tape
Top cover tape
Label
Label
AXS6N/6S
Emboss carrier tape
Emboss carrier tape
263