UPB1513TU-A CEL, UPB1513TU-A Datasheet - Page 10
![no-image](/images/manufacturer_photos/0/1/129/cel_sml.jpg)
UPB1513TU-A
Manufacturer Part Number
UPB1513TU-A
Description
Prescaler Divide by 4 Prescalr
Manufacturer
CEL
Type
RF IC'sr
Datasheet
1.UPB1513TU-A.pdf
(13 pages)
Specifications of UPB1513TU-A
Input Offset Voltage Max
5.5 V
Mounting Style
SMD/SMT
Package / Case
TU-8
Supply Current
48 mA
Operating Supply Voltage
4.5 V to 5.5 V
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
NOTES ON CORRECT USE
RECOMMENDED SOLDERING CONDITIONS
methods and conditions other than those recommended below, contact your nearby sales office.
10
Infrared Reflow
Wave Soldering
Partial Heating
Caution Do not use different soldering methods together (except for partial heating).
(1) Observe precautions for handling because of electro-static sensitive devices.
(2) Form a ground pattern as widely as possible to minimize ground impedance (to prevent undesired oscillation).
(3) Keep the track length of the ground terminals as short as possible.
(4) Bypass capacitance must be attached to V
(5) Exposed heatsink at bottom on package must be soldered to PCB RF/DC ground.
This product should be soldered and mounted under the following recommended conditions.
Soldering Method
Peak temperature (package surface temperature)
Time at peak temperature
Time at temperature of 220°C or higher
Preheating time at 120 to 180°C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (molten solder temperature)
Time at peak temperature
Preheating temperature (package surface temperature) : 120°C or below
Maximum number of flow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (terminal temperature)
Soldering time (per side of device)
Maximum chlorine content of rosin flux (% mass)
Data Sheet PU10540EJ02V0DS
CC
Soldering Conditions
line.
: 260°C or below
: 120±30 seconds
: 260°C or below
: 1 time
: 350°C or below
: 3 seconds or less
: 10 seconds or less
: 60 seconds or less
: 3 times
: 0.2%(Wt.) or below
: 10 seconds or less
: 0.2%(Wt.) or below
: 0.2%(Wt.) or below
Condition Symbol
µ
WS260
HS350
For soldering
IR260
PB1513TU