S-8110CNB-DRA-TF-G Seiko Instruments, S-8110CNB-DRA-TF-G Datasheet - Page 11

• Manufacturer Part Number: S-8110CNB-DRA-TF-G
• Description: IC TEMP SENSOR +/- 5C SC-82AB
• Manufacturer: Seiko Instruments

Specifications of S-8110CNB-DRA-TF-G

• Sensing Temperature: -40°C ~ 100°C
• Output Type: Voltage
• Voltage - Supply: 2.4 V ~ 10 V
• Accuracy: ±5°C
• Package / Case: SC-82A, SOT-343
• Full Temp Accuracy: +/- 5 C
• Gain: - 8.2 mV / C
• Maximum Operating Temperature: + 100 C
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Rev.5.0
• In this IC, if load resistance of VOUT pin is small, VOUT pin voltage may oscillate. It is recommended not to
• Wiring patterns for VDD pin, VOUT pin and VSS pin should be designed to hold low impedance.
• In this IC, if load capacitance of VOUT pin is large, VOUT pin voltage may oscillate. It is recommended not to
• Please do not connect a pull-up resistor to the output voltage pin.
• The application condition for input voltage, output voltage and load current must not exceed the package
• Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in
• Regarding the current at the output pin, refer to load regulation and footnote *1 in Table 5 to Table 6 “
• SII claims no responsibility for any and all disputes arising out of or in connection with any infringement of the
Precautions
use the external capacitor between the VOUT and VSS pin. In case of using external capacitor, mount it near
the VOUT pin.
When connecting A/D converter etc. to the VOUT pin, input pin capacitance of A/D converter and the
To prevent oscillation, it is recommended to use the following output load condition.
use the external resistor between the VOUT and VSS pin.
When connecting A/D converter etc. to the VOUT pin, input resistance of A/D converter and the parasitic
resistance component between wires are included as load resistance.
To prevent oscillation, it is recommended to use the following output load condition.
parasitic capacitance component between wires are included as load capacitance.
power dissipation.
electrostatic protection circuit.
Electrical Characteristics”.
products including this IC upon patents owned by a third party.
Caution The above connection diagram and constant will not guarantee successful operation.
_00
Load capacitance of VOUT pin (C
Load resistance of VOUT pin (R
Perform through evaluation using the actual application to set the constant.
C
IN
VDD
Seiko Instruments Inc.
L
) : 500 kΩ or more
L
) : 100 pF or less
S-8110C/8120C
Series
VSS
Figure 9
CMOS TEMPERATURE SENSOR IC
VOUT
C
L
R
S-8110C/8120C Series
L
V
OUT
11