H5BR-B-AC100-240 Omron, H5BR-B-AC100-240 Datasheet - Page 11

• Manufacturer Part Number: H5BR-B-AC100-240
• Description: TIMER DIGITAL LCD
• Manufacturer: Omron
• Series: H5BRr

Specifications of H5BR-B-AC100-240

• Relay Type: Integrated
• Function: Programmable (Multi-Function)
• Circuit: SPDT (1 Form C)
• Delay Time: 0.001 Sec ~ 9999 Hrs
• Output Type: Mechanical Relay
• Contact Rating @ Voltage: 5A @ 250VAC
• Voltage - Supply: 100 ~ 240VAC
• Mounting Type: Panel Mount
• Termination Style: Screw Terminal
• Timing Adjustment Method: Up/Down Digit Keys
• Timing Initiate Method: Input Voltage
• Lead Free Status / Rohs Status: Supplier Unconfirmed

H5BR
Changing the Set Value
To change the set value from 3 hr 5 min to 4 hr 5 min, press
the 3 key so that the number 4 appears in the hour's place.
• Pressing keys 1 through 4 increments the corresponding
• The columns can be changed in any order, but the output will
• Nonsignificant zeros are suppressed on the set value display.
Changing the Batch Count Set Value
1. Press the BATCH key to switch from the present value
Setting Mode
Changing Settings in the Set Mode
1. Press the MODE key to switch from run mode to set mode.
Run Mode
column by 1.
be turned ON if the set value is less than the present value.
• The timer will continue operation according to existing
• The MODE key will be locked if the key protection function
• Settings changed in the set mode do not take effect until
display to the batch count display.
EXAMPLES
settings when switched from run mode to set mode during
operation.
is enabled.
run mode is entered. Because the operating conditions will
change once this occurs, always use the RESET key or a
reset input to reset operation.
11
Note: Read Changing Set Values in the Precautions section
2. Change the set value when the timer is set to the batch
2. Press the MODE key to scroll successively through the items
count display.
• Nonsignificant zeros are normally suppressed on the batch
• Press the DISPLAY key to switch back from the batch
that can be set.
count set value display.
count display to the present value display.
before changing the timer set value during operation.
H5BR