ADNS-5060 Avago Technologies US Inc., ADNS-5060 Datasheet - Page 35

• Manufacturer Part Number: ADNS-5060
• Description: IC USB OPT MOUSE SENSOR HS 8-DIP
• Manufacturer: Avago Technologies US Inc.

Specifications of ADNS-5060

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Operation_Mode2
Access: Read/Write
Data Type: Bit field.
USAGE: The Operation_Mode2 register allows the user to change the operation of the sensor. Shown below are the bits,
Notes:
1. After 1 sec not moving during normal mode, chip will enter sleep mode. The chip remains in sleep mode until motion is detected or wakeup is
2. Only either one of these two bits FSleep and FWake can be set to 1 at the same time, others have to be set to 0. After a period of time, the bits which
35
Bit
Field
Field Name
Reset
PD
Sleep
FSleep
FWake
asserted.
were set to 1, will be reset to 0 by internal signal.
their default values, and optional values.
Operation_Mode2[2:0]
“0xx”=Disable sleep mode
“110”=Force enter sleep
“101”=Force wakeup from sleep mode
7
Reset
6
PD
Description
Full Chip Reset
0 = Normal operation
1 = Reset the chip
Power down
0 = Normal operation
1 = Power down all analog circuitry
Sleep Mode Enable
0 = Disable
1 = Enable
Force Enter Sleep Mode Manually
0 = Normal, fall asleep after one second of no movement
1 = Enter sleep mode and this bit will be reset to “0”
Manual Wake Up From Sleep Mode Manually
0 = Normal, fall asleep after one second of no movement
1 = Enter wake up mode and this bit will be reset to “0”
Address: 0x1a
Reset Value: 0x04
5
Reserved
4
3
2
Sleep
1
FSleep
0
FWake