SIDC38D60C6 Infineon Technologies, SIDC38D60C6 Datasheet - Page 4

• Manufacturer Part Number: SIDC38D60C6
• Description: DIODE FAST SW 600V 150A WAFER
• Manufacturer: Infineon Technologies

Specifications of SIDC38D60C6

• Voltage - Forward (vf) (max) @ If: 1.9V @ 150A
• Voltage - Dc Reverse (vr) (max): 600V
• Current - Average Rectified (io): 150A (DC)
• Current - Reverse Leakage @ Vr: 27µA @ 600V
• Diode Type: Standard
• Speed: Standard Recovery >500ns, > 200mA (Io)
• Mounting Type: Surface Mount
• Package / Case: Wafer
• Packages: --
• Technology: Emitter Controlled Diode 3
• Vds (max): 600.0 V
• If (max): 150.0 A
• If,sm (max): 450.0 A
• Vf (typ): 1.6 V
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Reverse Recovery Time (trr): -
• Capacitance @ Vr, F: -
• Other names: SP000015060

FURTHER ELECTRICAL CHARACTERISTICS:
This chip data sheet refers to the
device data sheet
Description:
Published by
Infineon Technologies AG
81726 München, Germany
© Infineon Technologies AG 2006.
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement,
regarding circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office in Germany or our Infineon Technologies Representatives world-wide (see
address list).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types
in question please contact your nearest Infineon Technologies Office.
Infineon Technologies components may only be used in life-support devices or systems with the express
written approval of Infineon Technologies, if a failure of such components can reasonably be expected to
cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or
system. Life support devices or systems are intended to be implanted in the human body, or to support
and / or maintain and sustain and / or protect human life. If they fail, it is reasonable to assume that the
health of the user or other persons may be endangered.
Edited by INFINEON Technologies, AIM PMD D CID CLS, L4591M, Edition 1.1, 10.07.2006
AQL 0,65 for visual inspection according to failure catalog
Electrostatic Discharge Sensitive Device according to MIL-STD 883
Test-Normen Villach/Prüffeld
FS150R06KE3
SIDC38D60C6