1601000-1 TE Connectivity, 1601000-1 Datasheet - Page 14

• Manufacturer Part Number: 1601000-1
• Manufacturer: TE Connectivity
• Type: Magnet Wire Terminalr

Specifications of 1601000-1

• Wire Gauge: 18-22
• Body Material: Brass
• Gender: PL
• Insulation: Non-Insulated
• Product Depth (mm): 7.62mm
• Product Length (mm): 9.3mm
• Color: Not Required
• Product Type: Terminal
• Terminal Configuration: Wire-to-Wire
• Specials: Standard
• Magnet Wire Range (mm [awg]): 0.16 – 1.02 [18 – 34]
• Lead Wire Range (mm² [awg]): 0.30 – 0.80 [18 – 22]
• Plating Material: Unplated
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Reel
• Lead Free Status / RoHS Status: Compliant

MPT-5S/L Machine for Mag
Wire Coil Termination
utilizing SIAMEZE and
Lead Lok terminals
Product Facts
Single, dual and triple
insertion
Two-reel, two-product
capability, with alternating
feed capability
Available as horizontal
bench, vertical bench or
independent module
Module easily integrates
into production lines using
simple handshake signals
Fine adjustment mechanism
for insertion depth
(.001 increments)
Tube-type insertion tooling
for standard SIAMEZE &
Lead Lok terminals
Microprocessor controlled
operation
Holding fixture for bobbin
can be designed and built
by Tyco Electronics or the
customer
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Magnet Wire Terminals and Termination Systems
MAG-MATE and SIAMEZE Application Tooling
For quick, easy and reliable
termination of magnet wire
without pre-stripping the
insulation or soldering,
Tyco Electronics offers the
SIAMEZE terminals and
Lead Lok product family
and the MPT-5S/L
(MAG-MATE Product
Terminator) air-operated
insertion machine with
micro-processor control.
The MPT-5S/L machine
inserts a SIAMEZE terminal
into a customer-designed
cavity in the coil bobbin or
similar magnet-wire
housing, terminating the
wire and providing an I/O
terminal or other connection.
The MPT-5S/L can insert
both the SIAMEZE terminal
for magnet wire termination
and the Lead Lok terminal
to assure your lead wire
connection.
Dual reel capability of the
MPT-5S/L allows insertion
of two different SIAMEZE
Dimensions are shown for
reference purposes only.
Specifications subject to change.
terminals, with the capability
to alternate between
inserting one and two
terminals at a time. Two
terminations per second are
possible with dual insertion.
A fifth generation machine,
the MPT-5s/L is lighter and
quieter than previous
versions. The MPT-5S/L is
available as a horizontal or
vertical bench machine or
as a discrete module for
integration into automated
lines. The discrete module
also can be used to make
a custom horizontal or
vertical bench machine.
A fixture to hold the coil
assembly, which is required
for bench operation, can
be designed and built by
Tyco Electronics or the
customer.
The MPT-5S/L uses three
or four air cylinders to feed
terminals from one or both
reels, cut terminals from the
carrier strip, and insert
Technical Support
USA: 1-800-522-6752
Canada: 1-905-475-6222
Mexico: 01-800-733-8926
(Continued)
terminals into the cavities.
The display shows the
operating conditions of the
machine such as the batch
count, total count, error
messages, and ready state.
The display also lets the
operator step through the
machine sequence or
manually cycles the
machine for set up or easy
diagnosis of problems.
Solderless SIAMEZE
terminations:
No need to pre-strip the
magnet wire
No wire embrittlements
due to solder
No soldering fumes
Compact, clean
termination
Ideal for automation
Fast magnet and lead
wire connections: Up to
two per second with dual
insertion
www.tycoelectronics.com
Catalog 82221
Revised 10-02
41