RV UVK105 CH2R2JW-F Taiyo Yuden, RV UVK105 CH2R2JW-F Datasheet - Page 9
![no-image](/images/manufacturer_photos/0/6/649/taiyo_yuden_sml.jpg)
RV UVK105 CH2R2JW-F
Manufacturer Part Number
RV UVK105 CH2R2JW-F
Description
Cap Ceramic 2.2pF 50VDC CH 5% SMD 0402 T/R
Manufacturer
Taiyo Yuden
Type
Flatr
Datasheet
1.UVK105CH0R6BW-F.pdf
(15 pages)
Specifications of RV UVK105 CH2R2JW-F
Package/case
0402
Mounting
Surface Mount
Capacitance Value
2.2 pF
Dielectric
CH
Voltage
50 Vdc
Product Length
1 mm
Product Height
0.5 mm
Tolerance
5 %
Note 1
Note 2
Note 3
Note 4, 5 :The figure indicates typical inspection. Please refer to individual specifications.
Note 6
Multilayer Ceramic Capacitor Chips
Note on standard condition: "standard condition" referred to herein is defined as follows: 5 to 35℃ of temperature, 45 to 85% relative humidity, and 86 to 106kPa of air pressure.
When there are questions concerning measurement results: In order to provide correlation data, the test shall be conducted under condition of 20±2℃ of temperature, 60 to 70% relative
humidity, and 86 to 106kPa of air pressure. Unless otherwise specified, all the tests are conducted under the "standard condition."
△
16.Loading under Damp Heat
17.Loading at High Tempera-
!
RELIABILITY DATA
当社カタログをご使用の際には 「当社製品に関するお断り」 を必ずお読みください。
ture
:For 105 type, specified in "High value".
:Thermal treatment (Multilayer) : 1 hr of thermal treatment at 150 +0 /−10 ℃ followed by 24±2 hrs of recovery under the standard condition shall be performed before the measurement.
:Voltage treatment (Multilayer) : 1 hr of voltage treatment under the specified temperature and voltage for testing followed by 24±2 hrs of recovery under the standard condition shall be performed before the measurement.
:Some of the parts are applicable in rated voltage×1.5. Please refer to individual specifications.
Item
Appearance: No ab-
normality
Capacitance change:
Within ± 7.5% or ±
0.75pF, whichever is
larger.
Q: C≧30 pF: Q≧200
C<30 pF: Q≧100 +
10C/3
C : Nominal capaci-
tance
Insulation resistance:
500 MΩ min.
Appearance: No ab-
normality
Capacitance change:
Within ±3% or
±0.3pF, whichever is
larger.
Q: C≧30 pF : Q≧350
10≦C<30 pF: Q≧275
+ 2.5C
C<10 pF: Q≧200 +
10C
C: Nominal
capacitance
Insulation resistance:
1000 MΩ min.
Temperature Compensating (Class 1)
Standard
Appearance: No ab-
normality
Capacitance change:
C≦2 pF: Within ±0.4 pF
C>2 pF: Within ±0.75
pF
C : Nominal capaci-
tance
Insulation resistance:
500 MΩ min.
Appearance: No ab-
normality
Capacitance change:
Within ±3% or ±
0.3pF, whichever is
larger.
Insulation resistance:
1000 MΩ min.
High Frequency Type
Specified Value
50 MΩμF or 1000 MΩ,
whichever is smaller.
Appearance: No ab-
normality
Capacitance change:
BJ: Within ±12.5%
F: Within ±30%
tan δ: BJ: 5.0% max.
Insulation resistance:
25 MΩμF or 500 MΩ,
whichever is the smaller.
Appearance: No ab-
normality
Capacitance change:
BJ: Within ±12.5%
F: Within ±30%
tan δ:
BJ: 4.0% max.
F: 7.5% max.
Insulation resistance:
Standard Note1
F: 7.5% max.
High Permittivity (Class 2)
Note 5
Note 4
Note 4
Note 5
Note 4
Note 4
Appearance: No ab-
normality
Capacitance change:
BJ:Within±12.5%
Note 4
tanδ:
Insulation resistance:
25 MΩμF or 500 MΩ,
whichever is the smaller.
Appearance: No abnormality
Capacitance change:
BJ:Within±12.5%
F:Within±30%
tanδ:
Insulation resistance:
50 MΩμF or 1000 MΩ,
whichever is smaller.
Note 5
F:Within±30%
BJ:5.0%max.
F:11%max.
BJ:5.0%max.
F:11%max.
Within±20%※※
Within±25%※※
High Value
△
Note 4
Note 5
Note 4
Note 4
!
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
According to JIS C 5102 Clause 9. 9.
Multilayer:
Preconditioning: Voltage treatment (Class 2)
Temperature: 40±2℃
Humidity: 90 to 95% RH
Charge and discharge current: 50mA max. (Class 1,2)
Recovery: Recovery for the following period under the standard
Temperature: 60±2℃
Humidity: 90 to 95% RH
Duration: 500
Charge and discharge current: 50mA max.
Recovery: 6∼24 hrs of recovery under the standard
According to JIS C 5102 clause 9.10.
Multilayer:
Preconditioning: Voltage treatment (Class 2)
Temperature:125±3℃(Class 1, Class 2: B, BJ (X7R) )
Duration: 1000
Applied voltage: Rated voltage×2
Recovery: Recovery for the following period under the
standard condition after the removal from test chamber.
24±2 hrs (Class 2)
HighーFrequency Multilayer:
Temperature: 125±3℃ (Class 1)
Duration: 1000
Applied voltage: Rated voltage×2
Recovery: 6∼24 hrs of recovery under the standard
Duration: 500
Applied voltage: Rated voltage
HighーFrequency Multilayer:
Applied voltage: Rated voltage
6∼24 hrs (Class 1)
condition after the removal from test chamber.
condition after the removal from test chamber.
condition after the removal from test chamber.
6∼24 hrs (Class 1)
24±2 hrs (Class 2)
85±2℃ (Class 2: BJ,F)
+24
−
+48
−
Test Methods and Remarks
+24
−
+48
−
0
0
0
0
hrs
hrs
hrs
hrs
Note 6
3/3
107
4