162GB12E1626SE Amphenol PCD, 162GB12E1626SE Datasheet - Page 3
![no-image](/images/manufacturer_photos/0/0/52/amphenol_pcd_sml.jpg)
162GB12E1626SE
Manufacturer Part Number
162GB12E1626SE
Description
Conn MIL-C-26482 Circular SKT 26 POS Crimp ST Box Mount 26 Terminal 1 Port
Manufacturer
Amphenol PCD
Type
MIL-C-26482 Circularr
Datasheet
1.162GB10E1210PC416.pdf
(41 pages)
Specifications of 162GB12E1626SE
Gender
RCP
Termination Method
Crimp
Mounting
Box Mount
Body Orientation
Straight
Tests
Examination of Product
Maintenance Ageing
Contact Insertion and Removal Forces
Contact Retention
Operating Forces
Insulation Resistance, Room Temperature
Dielectric Withstanding Voltage (Sea Level)
Dielectric Withstanding Voltage (Altitude)
Initial Contact Resistance
Thermal Shock
Insulation Resistance at Elevated Temps (Short Time)
Durability
Vibration
Shock
Moisture Resistance
Corrosion
Operating Forces
(a) Solvent Immersion Hydraulic Fluid
(b) Solvent Immersion Lubricating Oil
Insert Retention
Insert Retention Hermetic
Contact Retention Crimp
Contact Resistance
(Long Time)
Brief Description
Crimp only
There is no damage to the contacts or connectors after 10
removals and insertions of the contacts
Crimp only
Insertion – does not exceed 66.7 N (15lbf.) For individual contacts.
Removal – does not exceed 44.5N (10lbf.)
Crimp Contact
Contact locking mechanisms withstands the following minimum
axial forces:
Axial displacement does not exceed 0.304mm (0.012in) when
pressure is applied from face side.
Torque measurement of mating and unmating.
Ranges from 0.905 Nm. (8 lbf. in.) on shell size 8 to 4.971 Nm. (44
lbf. in.) on shell size 24 couplings.
Unmated connectors tested in accordance with Method 302 test
condition B of MIL-STD-202.
Mated and unmated connectors tested in accordance with Method
301 of MIL-STD-202.
Tested in accordance with Method 105, test condition C of MIL-
STD-202. After 30 minutes tested in accordance with Method 301
of MIL-STD-202 unmated and mated.
Between 45 and 95 millivolts drop on wire sizes from 24 to 12.
Crimp contacts to meet MIL-C-23216.
Unmated connectors tested in accordance with Method 107,
condition B of MIL-STD-202 except min. temp is –55
Greater than 3 megohms 250 hr at 125
Greater than 12 megohms 1000 hr at 105
500 cycles of coupling and uncoupling
In accordance with Method 204 Condition B of MIL-STD–202
Impulses of 50 G’s duration of 11 ±1 milliseconds
In accordance with Method 106 of MIL-STD-202
Salt Spray to Method 101 Condition B of MIL-STD-202
From 0.905 Nm. (8 lb. In.) for shell size 8 to 4.971 Nm. (44 lb. in.)
for shell size 24.
As per contact resistance test of MIL-C-23216.
Conforming to MIL-H-5606 20 hrs
Conforming to MIL-H-7808 20 hrs
Effective pressure differential of 5 17.0 KN/m
Effective pressure differential of 13 80.0 KN/m
Axial loads between 6 6.67 N (15 lbf.) and 111.2 N (25 lbf.)
CONTACT SIZE
FORCE (N)
FORCE (LBF)
Amphenol 162GB Series
DESIGNED TO COMPLY WITH MIL-26482
SCHEDULE OF TESTS REQUIRED FOR
20
89
20
QUALIFICATION APPROVAL
o
C
o
111
C
16
25
2
2
(75 p.s.i..)
200 (p.s.i.)
o
C.
133
12
30
3