PS2701A-1-F3-P-A California Eastern Labs, PS2701A-1-F3-P-A Datasheet - Page 9
![no-image](/images/manufacturer_photos/0/1/119/california_eastern_labs_sml.jpg)
PS2701A-1-F3-P-A
Manufacturer Part Number
PS2701A-1-F3-P-A
Description
Manufacturer
California Eastern Labs
Datasheet
1.PS2701A-1-F3-P-A.pdf
(13 pages)
Specifications of PS2701A-1-F3-P-A
Input Type
DC
Output Type
DC
Output Device
Transistor
Number Of Elements
1
Reverse Breakdown Voltage
6V
Forward Voltage
1.4V
Forward Current
30mA
Collector-emitter Voltage
70V
Package Type
SOP
Collector Current (dc) (max)
30mA
Isolation Voltage
3750Vrms
Power Dissipation
150mW
Collector-emitter Saturation Voltage
0.3V
Current Transfer Ratio
300%
Pin Count
4
Mounting
Surface Mount
Operating Temp Range
-55C to 100C
Operating Temperature Classification
Industrial
Lead Free Status / RoHS Status
Compliant
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
(2) Wave soldering
(3) Soldering by soldering iron
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
• Peak temperature (lead part temperature)
• Time (each pins)
• Flux
• Peak reflow temperature
• Time of peak reflow temperature
• Time of temperature higher than 220 C
• Time to preheat temperature from 120 to 180 C
• Number of reflows
• Flux
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100 C.
260 C or below (molten solder temperature)
10 seconds or less
120 C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
Data Sheet PN10396EJ05V0DS
350 C or below
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
260 C or below (package surface temperature)
10 seconds or less
60 seconds or less
120 30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
PS2701A-1
9