HW-FMC-XM105-G Xilinx Inc, HW-FMC-XM105-G Datasheet - Page 8

• Manufacturer Part Number: HW-FMC-XM105-G
• Description: CARD, CONNECTIVITY, FMC XM105
• Manufacturer: Xilinx Inc

Specifications of HW-FMC-XM105-G

• Kit Contents: FMC XM105 Debug Card, Welcome Letter, 4x Mounting Screws, 2x Standoffs
• Features: VITA 57.1 FMC HPC Connector, Power Good LEDs
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Chapter 1: XM105
Quick Start
8
System Requirements
Package Contents
Necessary Equipment
Hardware
Software
Table 1-1
high pin count (HPC) FMC interfaces are supported. The SP601 and SP605 boards provide
a single FMC LPC interface. The ML605 board provides one FMC LPC and one FMC HPC
interface. The XM105 contains an HPC connector that mates with either LPC or HPC
connectors.
Table 1-1: FMC Supported Boards
Example designs that use this hardware are not provided.
The following items are included in the HW-FMC-XM105-G shipment:
•
•
•
•
Board documentation, schematics, and PCB design files are available at
www.xilinx.com/fmc.
•
•
Notes:
Spartan-6 FPGA SP601 Evaluation Kit
Spartan-6 FPGA SP605 Evaluation Kit
Virtex-6 FPGA ML605 Evaluation Kit
While every effort has been made to comply with the FPGA Mezzanine Card Specification, Xilinx cannot
claim nor assume full compliance with the FMC/VITA-57-1 specification. Consequently, Xilinx cannot
claim nor support the usage of the XM105 on any other FMC (VITA-57.1) board.
Xilinx FMC cards are generally designed to implement expanded functionality for supported Xilinx
evaluation boards (SP601, SP605, or ML605) and thus might exceed the FMC card outline dimensions
discussed in the Single Width FMC Module Mechanical section of the FMC/VITA-57-1 specification.
Therefore, Xilinx FMC cards might not physically fit in a non-Xilinx evaluation board environment.
XM105
Four (4) mounting screws
Two (2) standoffs
Welcome letter
Small Phillips screwdriver to secure the XM105 to the board
PC with Internet access to download documentation, board files, and schematics
lists the boards validated to support the XM105. Both low pin count (LPC) and
Xilinx Platform
www.xilinx.com
EK-V6-ML605-G
EK-S6-SP601-G
EK-S6-SP605-G
Part Number
FMC XM105 Debug Card User Guide
UG537 (v1.2) September 24, 2010
FMC LPC
Support
1
1
1
FMC HPC
Support
0
0
1