1-770903-0 TE Connectivity, 1-770903-0 Datasheet

CONTACT, PIN, 22-18AWG, CRIMP

1-770903-0

Manufacturer Part Number
1-770903-0
Description
CONTACT, PIN, 22-18AWG, CRIMP
Manufacturer
TE Connectivity
Series
Mini-Universal MATE-N-LOKr
Datasheets

Specifications of 1-770903-0

Contact Material
Brass
Contact Plating
Gold
Contact Termination
Crimp
Wire Size (awg)
22-18
Rohs Compliant
Yes
Contact Gender
Pin
Product Type
Contacts
Voltage Rating
600 V
Current Rating
9.5 A
Mounting Style
Snap In
Termination Style
Quick Connect
Wire Gauge Range
22-18
Connector Line
Mini-Universal MATE-N-LOK
Wire Insulation Diameter (mm [in])
1.50 – 2.79 [0.059 – 0.110], 3.38 [0.133]
Voltage (vac)
600
Current Rating (a)
9.5
Termination Method
Crimp
Solder Tail Contact Plating
Bright Tin-Lead over Nickel
Wire Range (mm [awg])
0.30-0.90² [22-18], (2) 0.30-0.40² [(2) 22]
Contact Diameter (mm [in])
0.99 [0.039]
Stock Thickness (mm [in])
0.20 [0.008]
Contact Type
Pin
Contact Termination Type
Crimp
Contact Base Material
Brass
Contact Plating, Mating Area, Material
Gold (30)
Rohs/elv Compliance
RoHS compliant, ELV compliant
Lead Free Solder Processes
Not relevant for lead free process
Rohs/elv Compliance History
Always was RoHS compliant
Applies To
Wire/Cable
Packaging Method
Strip
For Use With
Mini-Universal MATE-N-LOK Connectors
Lead Free Status / Rohs Status
 Details

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
1-770903-0
Manufacturer:
TE/AMP
Quantity:
30 000
Part Number:
1-770903-0
Manufacturer:
TE
Quantity:
4 400
1.
1.1.
1.2.
1.3.
2.
2.1.
2.2.
2.3.
3.
3.1.
3.2.
©2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. Company
All Rights Reserved
TE logo is a trademark.
SCOPE
Content
This specification covers performance, tests and quality requirements for MATE-N-LOK* mini-universal
connectors.
Qualification
When tests are performed on the subject product line, procedures specified in Figure 1 shall be used.
All inspections shall be performed using the applicable inspection plan and product drawing.
Qualification Test Results
Successful qualification testing on the subject product line was completed on 02Aug04. Additional
testing on alternate plating was completed on 21Jan11. The Qualification Test Report number for this
testing is 501-589. This documentation is on file at and available from Engineering Practices and
Standards (EPS).
APPLICABLE DOCUMENTS
The following documents form a part of this specification to the extent specified herein. Unless
otherwise specified, the latest edition of the document applies. In the event of conflict between the
requirements of this specification and the product drawing, the product drawing shall take precedence.
In the event of conflict between the requirements of this specification and the referenced documents,
this specification shall take precedence.
TE Connectivity (TE) Documents
!
!
!
!
Commercial Standard
EIA-364: Electrical Connector/Socket Test Procedures Including Environmental Classifications
Reference Document
109-197: Test Specification (AMP Test Specifications vs EIA and IEC Test Methods)
REQUIREMENTS
Design and Construction
Product shall be of the design, construction and physical dimensions specified on the applicable product
drawing.
Materials
Materials used in the construction of this product shall be as specified on the applicable product
drawing.
102-950: Quality Specification (Qualification of Separable Interface Connectors)
109 Series: Test Specifications as indicated in Figure 1
114-16017: Application Specification (Mini-Universal MATE-N-LOK* Connectors)
501-589: Qualification Test Report (Mini-Universal MATE-N-LOK* Connector)
| Indicates change
*Trademark
Product
Specification
Mini-Universal MATE-N-LOK* Connector
For latest revision, visit our website at www.te.com/documents.
For Regional Customer Service, visit our website at www.te.com
Other products, logos, and company names might be trademarks of their respective owners.
108-1542
11Mar11 Rev D
1 of 10
LOC B

Related parts for 1-770903-0

1-770903-0 Summary of contents

Page 1

... This specification covers performance, tests and quality requirements for MATE-N-LOK* mini-universal connectors. 1.2. Qualification When tests are performed on the subject product line, procedures specified in Figure 1 shall be used. All inspections shall be performed using the applicable inspection plan and product drawing. 1.3. Qualification Test Results Successful qualification testing on the subject product line was completed on 02Aug04 ...

Page 2

... Temperature: -55 to 105° C 3.4. Performance and Test Description Product is designed to meet the electrical, mechanical and environmental performance requirements specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental conditions per EIA-364. 3.5. Test Requirements and Procedures Summary Test Description Initial examination of product ...

Page 3

... See Note. No discontinuities of 10 microseconds or longer duration. See Note. See Note. Contacts shall not dislodge. See Note. 13 lbf] maximum per contact. TE Spec 109-41. 6.7 N [1.5 lbf] maximum per circuit initial. 0.7 N [.15 lbf] minimum per circuit final lbf] minimum. 133.4 N [30 lbf]. ...

Page 4

... See Note. Figure 1 (end) 108-1542 Procedure EIA-364-31, Method III. Subject specimens to 10 cycles (10 days) between 25 and 65° 100% RH. EIA-364-17, Method A, Test Condition 4. Subject mated specimens to 105° C for 580 hours. EIA-364-65, Class IIA (4 gas). Subject mated specimens to environmental Class IIA for 20 days ...

Page 5

... Final examination of product (a) See paragraph 4.1.A. NOTE (b) Numbers indicate sequence in which tests are performed. (c) Discontinuities shall not be measured. Energize at 18 Quality Specification 102-950. th (d) The 4 test in this sequence shall be either humidity/temperature cycling for tin plated specimens or mixed flowing gas for gold plated specimens. Precondition specimens with 5 durability cycles ...

Page 6

... Temperature life Mixed flowing gas Final examination of product (a) See paragraph 4.1.A. NOTE (b) Numbers indicate sequence in which tests are performed. (c) Discontinuities shall not be measured. Energize at 18 per Quality Specification 102-950. (d) Precondition specimens with 5 durability cycles. Rev D Test Group (a) Test or Examination 1 Test Sequence (b) ...

Page 7

... Acceptance Acceptance is based on verification that the product meets the requirements of Figure 1. Failures attributed to equipment, test setup or operator deficiencies shall not disqualify the product. If product failure occurs, corrective action shall be taken and specimens resubmitted for qualification. Testing to confirm corrective action is required before resubmittal ...

Page 8

... Base rated Current for a single circuit at the maximum ambient operating temperature shown in Figures 4A. Test Reports CTL1314-004 and CTL7166-007 Rev Ambient Temperature (C) Figure 4A Current Carrying Capability (11.21 amperes) Percent Connector Loading Single 47% Brass/Tin Pin and Socket 1.00 .668 .248 ...

Page 9

... Base rated Current for a single circuit at the maximum ambient operating temperature shown in Figures 4C. Rev D Figure 4C Current Carrying Capability (8.55 amperes) Test Report EA20100461T Percent Connector Loading Single 47% Palladium Nickle Pin and Socket 1.00 .699 Figure 4D Current Rating Test Report EA20100461T 108-1542 100% .528 ...

Page 10

... Rev D Figure 5 Vibration Mounting Fixture Figure 6 Mechanical Shock Mounting Fixture 108-1542 ...

Related keywords