LTC2635CMSE-HZ12#PBF Linear Technology, LTC2635CMSE-HZ12#PBF Datasheet - Page 11

• Manufacturer Part Number: LTC2635CMSE-HZ12#PBF
• Description: IC DAC 12BIT I2C QUAD 10MSOP
• Manufacturer: Linear Technology

Specifications of LTC2635CMSE-HZ12#PBF

• Settling Time: 4.4µs
• Number Of Bits: 12
• Data Interface: I²C
• Number Of Converters: 4
• Voltage Supply Source: Single Supply
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 10-MSOP Exposed Pad, 10-HMSOP, 10-eMSOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power Dissipation (max): -

electrical characteristics
Note 1. Stresses beyond those listed under Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to any Absolute
Maximum Rating condition for extended periods may affect device reliability
and lifetime.
Note 2. All voltages are with respect to GND.
Note 3. High temperatures degrade operating lifetimes. Operating lifetime
is derated at temperatures greater than 105°C. Operating at temperatures
above 90°C and with V
73mV/ms.
Note 4. Linearity and monotonicity are defined from code k
where N is the resolution and k
rounded to the nearest whole code. For V
and linearity is defined from code 26 to code 4,095. For V
N = 12, k
Note 5. Inferred from measurement at code 16 (LTC2635-12), code 4
(LTC2635-10) or code 1 (LTC2635-8), and at full-scale.
Note 6. This IC includes current limiting that is intended to protect the
device during momentary overload conditions. Junction temperature can
exceed the rated maximum during current limiting. Continuous operation
above the specified maximum operating junction temperature may impair
device reliability.
L
= 16 and linearity is defined from code 16 to code 4,095.
CC
> 4V requires V
L
is given by k
CC
FS
slew rates to be no greater than
= 2.5V and N = 12, k
L
= 0.016 • (2
L
FS
to code 2
= 4.096V and
N
/ V
L
N
= 26
– 1,
FS
),
Note 7. Digital inputs at 0V or V
Note 8. Guaranteed by design and not production tested.
Note 9. Internal Reference mode. DAC is stepped 1/4 scale to 3/4 scale and
3/4 scale to 1/4 scale. Load is 2kΩ in parallel with 100pF to GND.
Note 10. Temperature coefficient is calculated by dividing the maximum
change in output voltage by the specified temperature range.
Note 11. Maximum V
Note 12. C
Note 13. All values refer to V
Note 14. Minimum V
won’t damage the IC, but could degrade performance.
B
= capacitance of one bus line in pF .
IL
IH
exceeds the Absolute Maximum rating. This condition
= V
CC(MAX)
IH
= V
CC
.
IH(MIN)
+ 0.5V.
and V
IL
= V
LTC2635
IL(MAX)
levels.

2635fb