PEF20550HV2.1XT Infineon Technologies, PEF20550HV2.1XT Datasheet - Page 105
PEF20550HV2.1XT
Manufacturer Part Number
PEF20550HV2.1XT
Description
Manufacturer
Infineon Technologies
Datasheet
1.PEF20550HV2.1XT.pdf
(407 pages)
Specifications of PEF20550HV2.1XT
Lead Free Status / Rohs Status
Compliant
- Current page: 105 of 407
- Download datasheet (2Mb)
Subscribers who are to participate in the D-channel arbitration for the SACCO-A must
send ’all 1s’ as inter frame timefill of their D-channels. Flags or idle codes other than ’all
1s’ are not permitted as inter frame timefill. For any participating subscriber, the
"blocked" code must be programmed into the downstream Control Memory (CM). Also,
the subscriber’s D-channel must be enabled in the DCE-register.
In the full selection state, the D-channel arbiter overwrites the downstream "blocked"
code of enabled subscribers with the "available" code. On the upstream CFI-input lines,
the D-channel arbiter monitors all D-channels enabled in the DCE-registers.
When the D-channel arbiter detects a '0' on any monitored D-channel it assumes this to
be the start of an opening flag. It therefore strobes the D-channel data of this subscriber
to the SACCO-A and starts the Suspend Counter. For this selected subscriber, the
D-channel arbiter continues to overwrite the downstream "blocked" code with the
"available" code. However, all other enabled subscribers are now passed the "blocked"
code from the downstream CM.
If the SACCO-A does indeed receive an HDLC-frame - complete or aborted - from the
selected subscriber, the Suspend Counter is reset. While the SACCO-A receives data
from the selected subscriber, the "blocked" code stops all other subscribers from
sending data to the SACCO-A. After the SACCO-A has received a closing flag or abort
sequence for the subscribers frame, the D-channel arbiter stops strobing the
subscriber’s data to the SACCO-A and enters the limited selection state.
If, after the initial '0', the SACCO-A does not receive an HDLC-frame - complete or
aborted - from the selected subscriber, it does not reset the Suspend Counter.
Eventually, the Suspend Counter under flows, setting off the ISTA.IDA-interrupt. The
subscriber who sent the erroneous '0' can then be identified in the ASTATE-register. Any
subscriber who frequently sends erroneous '0's should be disabled from the DCE, and
the cause of the error investigated. After the ISTA.IDA-interrupt, the SACCO-A receiver
must be reset to resume operation in the full selection state.
The limited selection state is identical to the full selection state, except that the
subscriber who last sent data to the SACCO-A is excluded from the arbitration. This
prevents any single subscriber from constantly keeping the SACCO-A busy. The
"blocked" code of the CM is passed to the excluded subscriber, while the D-channel
arbiter sends all other enabled subscribers the "available" code. All enabled subscribers
- except the one excluded - are monitored for the starting '0' of an opening flag. How long
the exclusion lasts can be programmed in the AMO-register. If none of the monitored
subscribers has started sending data during this time, the D-channel Arbiter re-enters
the full selection state.
3.7.2
Semiconductor Group
SACCO-A Reception
105
Operational Description
PEB 20550
PEF 20550
01.96
Related parts for PEF20550HV2.1XT
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
Extended Line Card Interface Controller Elic
Manufacturer:
Infineon Technologies Corporation
Datasheet:
Part Number:
Description:
Manufacturer:
Infineon Technologies AG
Datasheet:
Part Number:
Description:
Manufacturer:
Infineon Technologies AG
Datasheet:
Part Number:
Description:
Manufacturer:
Infineon Technologies AG
Datasheet:
Part Number:
Description:
Manufacturer:
Infineon Technologies AG
Datasheet:
Part Number:
Description:
Manufacturer:
Infineon Technologies AG
Datasheet:
Part Number:
Description:
Manufacturer:
Infineon Technologies AG
Datasheet:
Part Number:
Description:
Manufacturer:
Infineon Technologies AG
Datasheet:
Part Number:
Description:
16-bit microcontroller with 2x2 KByte RAM
Manufacturer:
Infineon Technologies AG
Datasheet:
Part Number:
Description:
NPN silicon RF transistor
Manufacturer:
Infineon Technologies AG
Datasheet:
Part Number:
Description:
NPN silicon RF transistor
Manufacturer:
Infineon Technologies AG
Datasheet:
Part Number:
Description:
NPN silicon RF transistor
Manufacturer:
Infineon Technologies AG
Datasheet:
Part Number:
Description:
NPN silicon RF transistor
Manufacturer:
Infineon Technologies AG
Datasheet:
Part Number:
Description:
Si-MMIC-amplifier in SIEGET 25-technologie
Manufacturer:
Infineon Technologies AG
Datasheet:
Part Number:
Description:
IGBT Power Module
Manufacturer:
Infineon Technologies AG
Datasheet: