LGA240A-24 Cosel U.S.A. Inc., LGA240A-24 Datasheet - Page 2

• Manufacturer Part Number: LGA240A-24
• Description: POWER SUPPLY, SINGLE OUTPUT, SWITCHING, 240 WATTS, 24 V, 10 A, 3.35 X 1.69 X 7.0
• Manufacturer: Cosel U.S.A. Inc.
• Type: Industrialr

Specifications of LGA240A-24

• Brand/series: LG Series
• Configuration: Open-Frame
• Mounting Type: Panel
• Number Of Outputs: 1
• Operation: Switching
• Output: 24 VDC @ 10 A
• Power, Output: 240 W
• Primary Type: AC-DC
• Voltage, Input: 85 to 132/110 to 170 VAC/VDC
• Voltage, Output: 24 VDC
• Lead Free Status / Rohs Status: RoHS Compliant part

LGA
INPUT
OUTPUT
PROTECTION
CIRCUIT AND
OTHERS
ISOLATION
ENVIRONMENT
SAFETY AND
NOISE
REGULATIONS
OTHERS
SPECIFICATIONS
MODEL
MAX OUTPUT WATTAGE[W]
DC OUTPUT
This power supply is manufactured by SMD technology.The stress to P.C.B like twisting or bending causes the defect of the unit,so handle the unit with care.
*1
*2
*3
*
*
*
*
E-90
This is the value that measured on measuring board with capacitor of 22mF at 150mm from output terminal.
Measured by 20MHz oscilloscope or Ripple-Noise meter (Equivalent to KEISOKU-GIKEN: RM-103).
Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output.
Peak loading for 10sec.And Duty 35% max.or less is acceptable if the total wattage is less than the rated wattage.
Refer to instruction Manual 5. In detail.
Avoid prolonged use under over - load.
Parallel operation with other model is not possible.
Derating is required when operated with chassis and cover.
A sound may occur from power supply at pulse loading.
R
MODEL
VOLTAGE[V]
CURRENT[A]
FREQUENCY[Hz]
EFFICIENCY[%]
INRUSH CURRENT[A] ACIN 100V
LEAKAGE CURRENT[mA]
VOLTAGE[V]
CURRENT[A]
LINE REGULATION[mV]
LOAD REGULATION[mV]
RIPPLE[mVp-p]
RIPPLE NOISE[mVp-p]
TEMPERATURE REGULATION[mV]
DRIFT[mV]
START-UP TIME[ms]
HOLD-UP TIME[ms]
OUTPUT VOLTAGE ADJUSTMENT RANGE[V] Fixed ( "Y"which can be adjusted the output is available as optional t 10% )
OUTPUT VOLTAGE SETTING[V]
OVERCURRENT PROTECTION Works over 105% of rating ( works over 101% of peak current at option -H ) and recovers automatically
OVERVOLTAGE PROTECTION
OPERATING INDICATION
REMOTE SENSING
REMOTE ON/OFF
INPUT-OUTPUT
INPUT-FG
OUTPUT-FG
OPERATING TEMP. , HUMID.AND ALTITUDE -10 to +60 C , 20 - 90%RH ( Non condensing ) ( Refer to DERATING CURVE ), 3 , 000m ( 10 , 000feet ) max
STORAGE TEMP. , HUMID.AND ALTITUDE -20 to +75 C , 20 - 90%RH ( Non condensing ), 9 , 000m ( 30 , 000feet ) max
VIBRATION
IMPACT
AGENCY APPROVALS
CE MARKING
CONDUCTED NOISE
CASE SIZE/WEIGHT
COOLING METHOD
LGA240A
Rugged PCB type
ACIN 100V 5.0typ ( Io=100% )
ACIN 100V
0 to +40 C
-10 - 0 C
0 to +40 C
-10 - 0 C
0 to +40 C 240max
-10 to +40 C 290max
* 3
* 1
* 1
* 1
* 1
* 2
LGA240A-24
240
24V 10A
LGA240A-24
AC85 - 132 1 f or DC110 - 170 ( Refer to Instruction Manual 1.1, and 3.2 Derating )
47 - 440 or DC ( Refer to Instruction Manual 1.1 )
86.5typ ( Io=100% )
15 / 20 typ ( Primary / Secondary Surge Current, Io=100%, More than 10sec. to re-start )
0.5max ( ACIN 100V, 60Hz , Io=100%, According to IEC60950-1 and DEN-AN )
24
10.0
96max
150max
120max
160max
150max
180max
96max
200max ( ACIN 100V , Io=100% )
20typ ( ACIN 100V , Io=100% )
23.00 - 25.00
27.60 - 35.00
Not provided
Not provided
Not provided
AC2 , 000V 1minute , Cutoff current = 10mA , DC500V 50M W min ( At Room Temperature )
AC2 , 000V 1minute , Cutoff current = 10mA , DC500V 50M W min ( At Room Temperature )
AC500V 1minute , Cutoff current = 25mA , DC500V 50M W min ( At Room Temperature )
10 - 55Hz , 19.6m/s
196.1m/s
UL60950-1 , C-UL ( CSA60950-1 ) , EN60950-1 Complies with DEN-AN
Low Voltage Directive
Complies with FCC-B , VCCI-B , CISPR-B , EN55011-B , EN55022-B
84 X 48.5 X 180mm ( W X H X D ) / 590g max ( without chassis and cover )
Convection
2
( 20G ), 11ms , once each X , Y and Z axis
2
( 2G ), 3minutes period , 60minutes each along X , Y and Z axis
1
Ordering information
LG
2
A
LGA240A-24-H
240
24V 10 ( Peak 12.5 ) A
LGA240A-24-H
86.5typ ( Io=100% )
24
10.0 ( Peak 12.5 )
96max
150max
240max
320max
300max
360max
240max
290max
96max
23.00 - 25.00
27.60 - 35.00
High voltage pulse noise type : NAP series
Low leakage current type : NAM series
*The Noise Filter is recommended
*to connect with several devices.
Recommended Noise Filter
NAC-16-472
3
240
4
A
1Series name
2Single output
3Output wattage
4100/120V input
5Output voltage
6Optional
C :with Coating
G :Low leakage current
H :with the function to be
J1:VH(J.S.T.)connector
S :with Chassis
SN:with Chassis & cover
Y :with Potentiometer
5
acceptable to output
peak current (only 24V)
type
-5
6
-O