PI7C8150AMAE Pericom Semiconductor, PI7C8150AMAE Datasheet - Page 69
![no-image](/images/manufacturer_photos/0/5/521/pericom_semiconductor_sml.jpg)
PI7C8150AMAE
Manufacturer Part Number
PI7C8150AMAE
Description
IC PCI-PCI BRIDGE 2PORT 208-FQFP
Manufacturer
Pericom Semiconductor
Datasheet
1.PI7C8150ANDE.pdf
(111 pages)
Specifications of PI7C8150AMAE
Applications
*
Interface
*
Voltage - Supply
*
Package / Case
208-FQFP
Mounting Type
Surface Mount
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
06-0057
9
9.1
9.2
10
PI7C8150A can start the transaction on the next PCI clock cycle by asserting P_FRAME_L
if P_GNT_L is still asserted.
If the internal secondary bus arbiter is enabled, the secondary bus is always parked at the
last master that used the PCI bus. That is, PI7C8150A keeps the secondary bus grant
asserted to a particular master until a new secondary bus request comes along. After reset,
PI7C8150A parks the secondary bus at itself until transactions start occurring on the
secondary bus. Offset 48h, bit 1, can be set to 1 to park the secondary bus at PI7C8150A.
By default, offset 48h, bit 1, is set to 0. If the internal arbiter is disabled, PI7C8150A parks
the secondary bus only when the reconfigured grant signal, S_REQ_L[0], is asserted and
the secondary bus is idle.
CLOCKS
This chapter provides information about the clocks.
PRIMARY CLOCK INPUTS
PI7C8150A implements a primary clock input for the PCI interface. The primary interface
is synchronized to the primary clock input, P_CLK, and the secondary interface is
synchronized to the secondary clock. The secondary clock is derived internally from the
primary clock, P_CLK. PI7C8150A operates at a maximum frequency of 66 MHz
(33MHz for PI7C8150A-33).
SECONDARY CLOCK OUTPUTS
PI7C8150A has 10 secondary clock outputs, S_CLKOUT[9:0] that can be used as clock
inputs for up to nine external secondary bus devices. The S_CLKOUT[9:0] outputs are
derived from P_CLK. The secondary clock edges are delayed from P_CLK edges by a
minimum of 0ns. This is the rule for using secondary clocks:
Each secondary clock output is limited to no more than one load.
GENERAL PURPOSE I/O INTERFACE
The PI7C8150A implements a 4-pin general purpose I/O interface. During normal
operation, device specific configuration registers control the GPIO interface. The GPIO
interface can be used for the following functions:
During secondary interface reset, the GPIO interface can be used to shift in a 16-bit
serial stream that serves as a secondary bus clock disable mask.
Along with the GPIO[3] pin, a live insertion bit can be used to bring the PI7C8150A to
a halt through hardware, permitting live insertion of option cards behind the
PI7C8150A.
Page 69 of 111
2-PORT PCI-TO-PCI BRIDGE
APRIL 2006 – Revision 1.1
PI7C8150A