HD64F2168VTE33 Renesas Electronics America, HD64F2168VTE33 Datasheet - Page 672

• Manufacturer Part Number: HD64F2168VTE33
• Manufacturer: Renesas Electronics America

Specifications of HD64F2168VTE33

• Cpu Family: H8S
• Device Core Size: 16/32Bit
• Frequency (max): 33MHz
• Interface Type: I2C/IrDA/SCI
• Program Memory Type: Flash
• Program Memory Size: 256KB
• Total Internal Ram Size: 40KB
• # I/os (max): 106
• Number Of Timers - General Purpose: 5
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 3V
• On-chip Adc: 8-chx10-bit
• On-chip Dac: 2-chx8-bit
• Instruction Set Architecture: CISC
• Operating Temp Range: -20C to 75C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 144
• Package Type: TQFP
• Lead Free Status / Rohs Status: Not Compliant

(1)
The on-chip program is automatically downloaded by setting the SCO bit to 1. The on-chip RAM
area to be downloaded is the 2-kbyte area starting from the address specified by FTDAR.
Download control is set by the program/erase interface registers, and the DPFR parameter
indicates the return value.
(a) Download pass/fail result parameter (DPFR: single byte of start address specified by FTDAR)
This parameter indicates the return value of the download result. The value of this parameter can
be used to determine if downloading is executed or not. Since the confirmation whether the SCO
bit is set to 1 is difficult, the certain determination must be performed by writing the single byte of
the start address specified by FTDAR to the value other than the return value of download (for
example, H'FF) before the download start (before setting the SCO bit to 1).
Bit
7 to 3
2
1
0
Rev. 3.00, 03/04, page 630 of 830
Download Control
Bit Name

SS
FK
SF
Initial
Value




R/W

R/W
R/W
R/W
Description
Unused
Return 0
Source Select Error Detect
Only one type for the on-chip program which can be
downloaded can be specified. When more than two
types of the program are selected, the program is not
selected, or the program is selected without mapping,
error is occurred.
0: Download program can be selected normally
1: Download error is occurred (multi-selection or
Flash Key Register Error Detect
Returns the check result whether the value of FKEY is
set to H′A5.
0: KEY setting is normal (FKEY = H'A5)
1: Setting value of FKEY becomes error (FKEY = value
Success/Fail
Returns the result whether download is ended normally
or not. The determination result whether program that is
downloaded to the on-chip RAM is read back and then
transferred to the on-chip RAM is returned.
0: Downloading on-chip program is ended normally (no
1: Downloading on-chip program is ended abnormally
program which is not mapped is selected)
other than H'A5)
error)
(error occurs)