1-280050-2 TE Connectivity, 1-280050-2 Datasheet - Page 45

• Manufacturer Part Number: 1-280050-2
• Manufacturer: TE Connectivity

Specifications of 1-280050-2

• Product Type: Terminal
• Terminal Type: Receptacle
• Mating Area Interface Dimensions (mm [in]): 6.35 x 0.81 [.250 x .032]
• Receptacle Style: Flag
• Insulation Support: Insulation Support
• Wire/cable Type: Stranded
• Insulation Diameter (mm [in]): 2.36-3.30 [.093-.130]
• Insertion Force: Normal
• Finish: Tin
• Crimp Type: F-Crimp
• Board Mount: No
• Weld Tab: Without
• Wire Range (mm [awg]): 0.50-1.50² [20-15]
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Strip

IDC Harness Maker –
IHM Mark III
The new IHM Mark III is a very
high performance, fully-
automatic machine designed to
manufacture parallel jumper
harnesses using IDC tech-
nology.
The simultaneous feeding of up
to 21 wires guarantees high
productivity and flexibility and a
choice of 2.5 mm or 5.0 mm
pitch IDC systems.
The gripper unit on the left side
of the machine is able to spread
the wires in both directions to
enable the production of har-
nesses using both 2.5 mm and
5.0 mm pitch connectors at the
same time.
Available options are a stripper
crimper unit with an integrated
crimp force analyser and a
good/bad sorting unit.
The IDC workstations are easily
reconfigured for processing our
different IDC connector
systems. They include all the
necessary processing
operations for IDC termination
with minimum change-over
and set up times.
Quality checks integrated in the
manufacturing process ensure
the highest quality harness for
every production run.
Products for Industrial &
Commercial Applications
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Technical Features
AMP MONO-SHAPE MARK II
Connectors in In-Line Mating Technology
Application Tooling (continued)
Manufacturing of harnesses
using 2.5 mm and/or 5.0 mm
pitch IDC systems.
Very short wire length is
possible.
Option available to produce
harnesses with crimp
terminals on one side.
IDC Workstations are
available for the following
connector systems:
AMP DUOPLUG 2.5
AMP DUOPLUG 2.5
Mark II
AMP DUOPLUG Power
AMP multifitting Mark II
AMP MONO-SHAPE
Mark II
AMP MT Edge
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
The specific key coding of
the IDC connector is done on
the IDC Workstation.
Integrated test equipment
checks the coding and the
insertion depth of the wire,
and performs a continuity
test. A spark testing unit is
also available as an option.
Operator PC interface
displays machine status and
production data; different
languages available.
Low maintenance costs and
the capability of off-site
troubleshooting via modem.
Ergonomic and easy to
operate through a Touch
Screen Display.
Specifications subject to
change.
Dimensions are
millimetres over inches
METRIC
Technical Data
Power Supply:
400 V AC, 50 Hz
Air Pressure:
6 bar
Wire Size Range:
0.22 mm
Wire Length:
125 mm up to 2,200 mm
Insulation Diameter Range:
1.2 mm up to 3.0 mm
Wire Type:
Stranded conductors
www.tycoelectronics.com
2
Catalogue 1654742
up to 1.5 mm
Revised 5-04
2
2045
2