PM8621 PMC-Sierra, Inc., PM8621 Datasheet - Page 105
PM8621
Manufacturer Part Number
PM8621
Description
NSE-8G Standard Product Data Sheet Preliminary
Manufacturer
PMC-Sierra, Inc.
Datasheet
1.PM8621.pdf
(184 pages)
- Current page: 105 of 184
- Download datasheet (946Kb)
Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers’ Internal Use
Document ID: PMC-2010850, Issue 1
Register 108H + N*20H, T8TE Control and Status
These registers provide, control and report the status of the T8TE blocks.
Reserved[1:0]
DLCV
CENTER
TPINS
Bit
Bit 31:6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
The Reserved bit must be set to the indicated default value for correct operation of the NSE.
The diagnose line code violation bit (DLCV) controls the insertion of line code violation in
the outgoing data stream. While DLCV is logic one and TCBMODE is logic 0, the
transmitted 8B/10B codes are inverted. This will result in at least one disparity error at a
receive 8B/10B decoder. When the NSE-8G is configured with TCBMODE logic one, and
DLCV logic one, 8B/10B data characters are inverted while the TeleCombus control
characters are not inverted. When DLCV is logic 0, no code inversion is performed.
The FIFO centering control bit (CENTER) controls the separation of the T8TE FIFO read
and write pointers. CENTER is a write only bit. When a logic high is written to CENTER,
and the current FIFO depth is not in the range of 3, 4 or 5 characters, the FIFO depth is forced
to be four 8B/10B characters deep, with a momentary data corruption. Writing to the
CENTER bit when the FIFO depth is in the 3, 4 or 5 character range produces no effect.
CENTER always returns a logic low when read.
This bit must be set after CSU lock has been achieved to properly center the FIFO.
The Test Pattern Insertion (TPINS) controls the insertion of test pattern in the outgoing data
stream for jitter testing purpose. When this bit is set high, TP[9:0] in the T8TE Test Pattern
register is selected for output.
Type
R/W
R/W
R/W
W
R/W
R/W
FIFOERRE
TPINS
CENTER
DLCV
Function
Unused
Reserved[1]
Reserved[0]
Default
X
0
0
0
0
1
0
NSE-8G™ Standard Product Data Sheet
Preliminary
104
Related parts for PM8621
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
Pm Surface Mount Crystals
Manufacturer:
MtronPTI Inc.
Datasheet:
Part Number:
Description:
Pm 100 Series, 100 Watt Open Pcb Constructed Ac-dc Medical
Manufacturer:
RSG Electronic Components GmbH
Datasheet:
Part Number:
Description:
2 Megabit (256K x 8) 5.0 Volt-only CMOS Flash Memory
Manufacturer:
PMC-Sierra, Inc.
Part Number:
Description:
Interface, Multi-rate Telecom Backplane SERDES for 2.5Gbit/s Interconnect
Manufacturer:
PMC-Sierra, Inc.
Part Number:
Description:
processor, Spectra-9953 Device Driver
Manufacturer:
PMC-Sierra, Inc.
Part Number:
Description:
Ethernet, 8 Channel 10/100 Ethernet over SONET/SDH Mapping Device
Manufacturer:
PMC-Sierra, Inc.
Part Number:
Description:
Interface, Single Chip ADM for 622 & 155Mbit/s
Manufacturer:
PMC-Sierra, Inc.
Part Number:
Description:
Interface, Single Chip ADM for 622 & 155Mbit/s
Manufacturer:
PMC-Sierra, Inc.
Part Number:
Description:
Interface, Multi-rate SATURN User Network Interface for 2x622 and 4x155
Manufacturer:
PMC-Sierra, Inc.
Part Number:
Description:
SONET/SDH TRIBUTARY UNIT PAYLOAD PROCESSOR
Manufacturer:
PMC-Sierra, Inc.
Datasheet:
Part Number:
Description:
Processor, SONET/SDH Tributary Unit Payload Processor for 2488.32Mbit/s
Manufacturer:
PMC-Sierra, Inc.
Part Number:
Description:
HIGH DENSITY 84/63 CHANNEL VT/TU MAPPER AND M13 MULTIPLEXER
Manufacturer:
PMC-Sierra, Inc.
Datasheet: